Stair cleaning, Select proper tool, Attach wand and tools

Stair cleaning

23A stair cleaning handle has been designed for ease in using your

cleaner on stairs. With handle in oper- ating position, place fingers under the edge of stair cleaning handle and guide cleaner with the other hand on upper handle.

As an alternative, you may use the hose and furniture nozzle for stair cleaning. Clean from bottom to top.

When using cleaning tools, the agi- tator will continue to rotate.

CAUTION: To avoid personal injury or unnecessary wear to carpet, and to prevent the cleaner from falling, always place it a t bottom of stairs.

Cleaning tools

Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.

Suction will automatically be diverted to the hose when handle is in upright position and cleaner is turned ON.

CAUTION: Agitator continues to rotate while cleaner handle is in upright position. Avoid tipping cleaner or setting it on furniture, fringed area rugs or carpeted stairs during tool use.

How to clean tools

To clean hose, wipe off dirt with a cloth dampened in a mild detergent. Rinse with a damp cloth.

Cleaning tools may be washed in warm water with a detergent. Rinse and air dry before using.

24	B
A	B
	C
	D

24 Select proper tool

A. Dusting brush may be

used for carved furniture, table tops, books, lamps, lighting fixtures, venetian blinds, baseboards, shut- ters, and registers.

B. Furniture nozzle may be used for upholstered furniture, draperies, mattresses, clothing, automobile interiors, and carpeted stairs.

C. Wand is used to give extra length to your hose. Use it with any of the above tools.

D. Crevice wand may be used in tight spaces, corners and along edges in such places as dresser drawers, upholstered furniture, stairs and baseboards. It can also be used for extra reach with the dusting brush and/or extension wand.

Attach wand and tools

When using cleaning tools, cleaner should be in upright position. Also, turn cleaner OFF before dis- connecting and connecting hose to hose tube (A).

25To use hose, lift hose end as shown. Lower cover (B) on

hose tube.

When you are finished cleaning with the tools, be sure to lift cover from hose tube and reposition hose end into tube.

26Attach tool or wand to the hose (C) by pushing it firmly

into hose.

Attach second wand or tool to wand

(D)by pushing it firmly onto the wand.

Twist wand or tool slightly to tighten or loosen the connection.

Maintenance

Disconnect cleaner from electrical outlet before attempting to ser- vice it in any manner.

Do not operate cleaner without either cloth filter bag or paper fil- ter bag in place.

The cloth filter bag

When to empty

Check filter bag from time to time. It should be emptied often. If the filter bag is allowed to overfill, the cleaner will not operate effectively.

AF9 specifications

The SSS AF9 is an advanced, high-performance concept introduced within the realm of small unmanned aerial vehicles (UAVs). Specifically designed for tactical applications, the AF9 boasts a range of features and technologies that enhance its operational capabilities.

One of the defining characteristics of the AF9 is its impressive flight endurance. With a capability to operate for extended durations, this UAV excels in reconnaissance and surveillance missions, providing invaluable real-time intelligence to decision-makers. The AF9’s ability to cover vast areas without the need for frequent landings sets it apart from many other drones in its category.

In terms of design, the SSS AF9 features a streamlined profile that ensures minimal drag and maximizes efficiency during flight. The airframe is constructed from lightweight composite materials, which not only reduces the overall weight but also enhances durability and resistance to environmental stresses. This construction contributes to the UAV's agility and speed, allowing it to maneuver effectively in varied terrains.

The AF9 is equipped with cutting-edge avionics and navigation systems. These technologies include advanced GPS and inertial navigation systems that facilitate precision tracking and positioning. Additionally, the UAV can operate autonomously or be controlled remotely, allowing flexible operational tactics based on mission requirements.

For payload versatility, the SSS AF9 supports various sensor packages and equipment, including high-resolution cameras, thermal imaging sensors, and electronic warfare devices. This modular capability allows operators to tailor the UAV for specific missions, be it intelligence, reconnaissance, or tactical support.

Communication technology is another crucial aspect of the SSS AF9. It employs secure, encrypted communication links, ensuring that data transmission remains confidential even in contested environments. This feature is vital for military operations where operational security is paramount.

Moreover, the SSS AF9 is designed with user-friendly interfaces, enabling operators to execute complex missions with ease. Comprehensive training programs are available to ensure that personnel can maximize the UAV's capabilities effectively.

In summary, the SSS AF9 represents a significant advancement in the field of tactical UAVs, combining flight endurance, advanced design, modularity, and secure communication technologies to meet the demands of modern operations. Its versatility enables it to adapt to a myriad of mission profiles, making it a reliable asset in various scenarios.