Spectra Watermakers MPC-5000 owner manual Ventura MPC New System Start-Up and Testing

Page 18

Ventura MPC New System Start-Up and Testing

Avoid running the Ventura system if the vessel is in contaminated water, such as in a harbor or canal. The system should be fully tested before leaving port. If the location or weather prevents proper testing refer to the section “Dry Testing.”

Warning! Damage may occur if the purge sequence is bypassed and the membrane is pressurized with storage chemical in it.

First check that:

•Thru-hull inlet valve is open and the brine discharge valve is open.

•All of your hose connections are tight.

•The green tag with the spacer under the pressre relief valve has been removed.

•The pressure relief valve is open 1/2 turn.

•The switch on the MPC control box is set to the“Auto” position.

Remove Tag and Washer!

Open 1/2 Turn when Purging Chemicals!

Power up the system by turning on the cir- cuit breaker. A message on the display will read Open Pressure Relief Valve Now

Push the “Auto Run” Button. The feed pump will start and the message “Purging Storage Solution” will appear.

Note: See Part 2 for instructions on dimming the display and programming from the display

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page Page Table of Contents Page Introduction to the Ventura 150 MPC Water to get safely into your next portGetting Started Ventura MPC Shipping ListRead the directions Installation BasicsWiring Thru-hullsVentura 150 MPC Plumbing Sea Strainer, Mount withFeed Pump Relocation Product Water Plumbing Product to tankProduct Tube Fitting Assembly Body Nut Dissemble fitting components Tubing MaxMembrane Pressure Vessel Relocation Spectra High Pressure Tube Fitting Assembly Correct torque is specification is 85 foot poundsMPC-5000 Wiring Total length for a pair of wiresClark Pump Harness Tank Switch Installation and Operation Page Ventura MPC New System Start-Up and Testing Page MPC Display Modes SalinityVentura MPC Dry Testing With Artificial Ocean Ventura MPC Operation Normal operation Flush Cycle Adjustment Automatic Store CycleManual Operation Manual Automatic OperationLong Term Storage Procedures System Storage or PicklingVentura MPC Storage Procedure Clean UpWinterizing Prefilters Maintenance GeneralSeawater Strainer Oil Water Separator OptionalMembrane Cleaning MembranesCleaning Procedure Do not Close the pressure relief valveSuggested Spares Ventura MPC Spectra Watermakers recommended spare partsVentura MPC Troubleshooting Procedures Error Messages Accumulator Pressure OP-2 BAD Smelling Product Water OP-3 Chemicals OP-4 Fresh Water Flush PF-3 PREFILTERS- ShurFlo SF-1 Shurflo Pump WON’T RUN SF-2 Adjust Shurflo Pressure Switch HS LF-1 Poor Product Quality HS LF-2 Flow TEST/ Shurflo Brane Operation Manual Brane Power Harness Do not Disconnect Or Splice ANY High Voltage Wiring Part Numbers Part Numbers PL-TEE-1/2FNPL-CKV-1/4M-F PL-NLT-1/2HP EL-FP-FPHS Clark Pump Front View Reversing Valve End Blocks Center Block PartsCylinder Assembly

MPC-5000 specifications

The Spectra Watermakers MPC-5000 is a highly efficient water desalination system designed for a variety of applications, including marine, off-grid, and emergency situations. Known for its reliability and innovative technology, the MPC-5000 stands out as one of the leading solutions for producing fresh water from saltwater.

One of the main features of the MPC-5000 is its impressive production capacity. Capable of producing up to 5,000 gallons of fresh water per day, this system is well-suited for larger vessels or facilities with significant water needs. This robust output makes it an ideal choice for yachts, research vessels, and even small communities in remote areas.

The MPC-5000 utilizes advanced reverse osmosis technology, a process that efficiently separates salt and impurities from seawater. This technique not only ensures high-quality drinking water but also operates at lower energy consumption compared to traditional desalination methods. By employing a state-of-the-art energy recovery device, the MPC-5000 maximizes energy efficiency, significantly reducing operational costs and environmental impact.

In terms of build quality, the MPC-5000 is constructed with marine-grade materials to withstand harsh conditions, making it durable and reliable for long-term use. Its compact design allows easy installation on various platforms, and the system can be operated either through AC or DC power sources, providing flexibility for diverse applications.

The onboard controls of the MPC-5000 are user-friendly, featuring a digital display that provides real-time data on system performance, water production rates, and maintenance alerts. This intuitive interface simplifies operation and monitoring, ensuring users can quickly identify and address any issues.

Another noteworthy characteristic is its low maintenance requirement. The MPC-5000 is designed for easy serviceability, allowing users to conduct routine maintenance with minimal downtime. The integrated filtration system and user-replaceable membrane further enhance its appeal, offering convenience without sacrificing performance.

In conclusion, the Spectra Watermakers MPC-5000 is a standout solution in the water desalination market. With its impressive production capacity, advanced technology, durable construction, and user-friendly design, it meets the water needs of various users while ensuring efficient and reliable operation. Whether for marine use, emergencies, or off-grid living, the MPC-5000 represents a smart investment in sustainable water sourcing.
Top Page Image Contents