Spectra Watermakers MPC-5000 owner manual Winterizing

Page 27

Winterizing

1.Close yellow service valve, push “Auto Store” to flush the system.

2.Connect the inlet service hose and the brine discharge service hose. Place them in the service container or bucket.

3.Push “Auto Store” and run until there is 1 gallon (4L) of fresh water in the bucket, then stop the system.

4.Reconnect the brine overboard hose to the Clark Pump

5.Turn the service valve to the “Service” position.

6.Pour 2 gallons (8L) of Propylene Glycol in the bucket.

7.Make sure that the pressure relief valve is OPEN (un-pressurized).

8.Turn on the feed pump with the manual switch on the MPC control box until antifreeze appears in the brine overboard hose.

9.Stop the pump. Reconnect the brine service hose. Start the pump and re-circulate the re- maining antifreeze for a few minutes.

10.Close the seawater intake and the service valve. Drain the strainer and the hose leading to the inlet module.

11.Disconnect the product to tank tube and blow the water out of it with compressed air.

Valve in off position

Open the pressure relief valve

 

Valve in service position

Connecting brine discharge hose

27

Image 27
Contents Page Page Table of Contents Page Water to get safely into your next port Introduction to the Ventura 150 MPCVentura MPC Shipping List Getting StartedThru-hulls Installation BasicsWiring Read the directionsSea Strainer, Mount with Ventura 150 MPC PlumbingFeed Pump Relocation Product to tank Product Water PlumbingBody Nut Dissemble fitting components Tubing Max Product Tube Fitting AssemblyMembrane Pressure Vessel Relocation Correct torque is specification is 85 foot pounds Spectra High Pressure Tube Fitting AssemblyTotal length for a pair of wires MPC-5000 WiringClark Pump Harness Tank Switch Installation and Operation Page Ventura MPC New System Start-Up and Testing Page Salinity MPC Display ModesVentura MPC Dry Testing With Artificial Ocean Ventura MPC Operation Normal operation Automatic Store Cycle Flush Cycle AdjustmentManual Automatic Operation Manual OperationSystem Storage or Pickling Long Term Storage ProceduresClean Up Ventura MPC Storage ProcedureWinterizing Oil Water Separator Optional Maintenance GeneralSeawater Strainer PrefiltersMembranes Membrane CleaningDo not Close the pressure relief valve Cleaning ProcedureSpectra Watermakers recommended spare parts Suggested Spares Ventura MPCVentura MPC Troubleshooting Procedures Error Messages Accumulator Pressure OP-2 BAD Smelling Product Water OP-3 Chemicals OP-4 Fresh Water Flush PF-3 PREFILTERS- ShurFlo SF-1 Shurflo Pump WON’T RUN SF-2 Adjust Shurflo Pressure Switch HS LF-1 Poor Product Quality HS LF-2 Flow TEST/ Shurflo Brane Operation Manual Brane Power Harness Do not Disconnect Or Splice ANY High Voltage Wiring Part Numbers PL-TEE-1/2FN Part NumbersPL-CKV-1/4M-F PL-NLT-1/2HP EL-FP-FPHS Clark Pump Front View Reversing Valve End Blocks Parts Center BlockCylinder Assembly

MPC-5000 specifications

The Spectra Watermakers MPC-5000 is a highly efficient water desalination system designed for a variety of applications, including marine, off-grid, and emergency situations. Known for its reliability and innovative technology, the MPC-5000 stands out as one of the leading solutions for producing fresh water from saltwater.

One of the main features of the MPC-5000 is its impressive production capacity. Capable of producing up to 5,000 gallons of fresh water per day, this system is well-suited for larger vessels or facilities with significant water needs. This robust output makes it an ideal choice for yachts, research vessels, and even small communities in remote areas.

The MPC-5000 utilizes advanced reverse osmosis technology, a process that efficiently separates salt and impurities from seawater. This technique not only ensures high-quality drinking water but also operates at lower energy consumption compared to traditional desalination methods. By employing a state-of-the-art energy recovery device, the MPC-5000 maximizes energy efficiency, significantly reducing operational costs and environmental impact.

In terms of build quality, the MPC-5000 is constructed with marine-grade materials to withstand harsh conditions, making it durable and reliable for long-term use. Its compact design allows easy installation on various platforms, and the system can be operated either through AC or DC power sources, providing flexibility for diverse applications.

The onboard controls of the MPC-5000 are user-friendly, featuring a digital display that provides real-time data on system performance, water production rates, and maintenance alerts. This intuitive interface simplifies operation and monitoring, ensuring users can quickly identify and address any issues.

Another noteworthy characteristic is its low maintenance requirement. The MPC-5000 is designed for easy serviceability, allowing users to conduct routine maintenance with minimal downtime. The integrated filtration system and user-replaceable membrane further enhance its appeal, offering convenience without sacrificing performance.

In conclusion, the Spectra Watermakers MPC-5000 is a standout solution in the water desalination market. With its impressive production capacity, advanced technology, durable construction, and user-friendly design, it meets the water needs of various users while ensuring efficient and reliable operation. Whether for marine use, emergencies, or off-grid living, the MPC-5000 represents a smart investment in sustainable water sourcing.