Spectra Watermakers MPC-5000 owner manual Brane Power Harness

Page 44

The Z-braneis a revolutionary product which incorporates the Z-Guard High Voltage Capacitive technology into the membrane pressure vessel. Always active, the Z-Brane creates an environment that is unfriendly to bio-film and bacteria. The Z technoalgy also assits in the prevention of scale formation on the membrane surfaces. The Z-Brane allows the system to be shut down or decommissioned for extended periods of time without chemicals or preservatives. The Z-Brane will not prevent freezing so that in cold climates Propylene Glycol is still required.

The Z-Brane system is integral with the watermaker unit and only requires continuous 12Vor 24V DC power to be operative. The installation of the Z-Brane only consists of wiring the power supply to a continuous source The Z-brane power supply can tolerate voltages between 10V and 28V DC.

Note: There is no reason to open the transformer enclosure. Do not ser- vice this unit without disconnecting the power source! There may be high voltage present.

It is recommended that the Z-Brane be connected to a discreet continuous power source. The power must be on during the time that the system is operation and during the time the Z-Brane is used for membrane storage. If the power is obtained from the MPC then the MPC must be powered up at all times during storage. This may not be desirable.

Fuse the power at the source with a 5 amp fuse or circuit breaker.

Red is Positive (+) , Black is Ground (-)

Z-Brane Power Harness

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Page Page Table of Contents Page Introduction to the Ventura 150 MPC Water to get safely into your next portGetting Started Ventura MPC Shipping ListInstallation Basics WiringRead the directions Thru-hullsVentura 150 MPC Plumbing Sea Strainer, Mount withFeed Pump Relocation Product Water Plumbing Product to tankProduct Tube Fitting Assembly Body Nut Dissemble fitting components Tubing MaxMembrane Pressure Vessel Relocation Spectra High Pressure Tube Fitting Assembly Correct torque is specification is 85 foot poundsMPC-5000 Wiring Total length for a pair of wiresClark Pump Harness Tank Switch Installation and Operation Page Ventura MPC New System Start-Up and Testing Page MPC Display Modes SalinityVentura MPC Dry Testing With Artificial Ocean Ventura MPC Operation Normal operation Flush Cycle Adjustment Automatic Store CycleManual Operation Manual Automatic OperationLong Term Storage Procedures System Storage or PicklingVentura MPC Storage Procedure Clean UpWinterizing Maintenance General Seawater StrainerPrefilters Oil Water Separator OptionalMembrane Cleaning MembranesCleaning Procedure Do not Close the pressure relief valveSuggested Spares Ventura MPC Spectra Watermakers recommended spare partsVentura MPC Troubleshooting Procedures Error Messages Accumulator Pressure OP-2 BAD Smelling Product Water OP-3 Chemicals OP-4 Fresh Water Flush PF-3 PREFILTERS- ShurFlo SF-1 Shurflo Pump WON’T RUN SF-2 Adjust Shurflo Pressure Switch HS LF-1 Poor Product Quality HS LF-2 Flow TEST/ Shurflo Brane Operation Manual Brane Power Harness Do not Disconnect Or Splice ANY High Voltage Wiring Part Numbers Part Numbers PL-TEE-1/2FNPL-CKV-1/4M-F PL-NLT-1/2HP EL-FP-FPHS Clark Pump Front View Reversing Valve End Blocks Center Block PartsCylinder Assembly

MPC-5000 specifications

The Spectra Watermakers MPC-5000 is a highly efficient water desalination system designed for a variety of applications, including marine, off-grid, and emergency situations. Known for its reliability and innovative technology, the MPC-5000 stands out as one of the leading solutions for producing fresh water from saltwater.

One of the main features of the MPC-5000 is its impressive production capacity. Capable of producing up to 5,000 gallons of fresh water per day, this system is well-suited for larger vessels or facilities with significant water needs. This robust output makes it an ideal choice for yachts, research vessels, and even small communities in remote areas.

The MPC-5000 utilizes advanced reverse osmosis technology, a process that efficiently separates salt and impurities from seawater. This technique not only ensures high-quality drinking water but also operates at lower energy consumption compared to traditional desalination methods. By employing a state-of-the-art energy recovery device, the MPC-5000 maximizes energy efficiency, significantly reducing operational costs and environmental impact.

In terms of build quality, the MPC-5000 is constructed with marine-grade materials to withstand harsh conditions, making it durable and reliable for long-term use. Its compact design allows easy installation on various platforms, and the system can be operated either through AC or DC power sources, providing flexibility for diverse applications.

The onboard controls of the MPC-5000 are user-friendly, featuring a digital display that provides real-time data on system performance, water production rates, and maintenance alerts. This intuitive interface simplifies operation and monitoring, ensuring users can quickly identify and address any issues.

Another noteworthy characteristic is its low maintenance requirement. The MPC-5000 is designed for easy serviceability, allowing users to conduct routine maintenance with minimal downtime. The integrated filtration system and user-replaceable membrane further enhance its appeal, offering convenience without sacrificing performance.

In conclusion, the Spectra Watermakers MPC-5000 is a standout solution in the water desalination market. With its impressive production capacity, advanced technology, durable construction, and user-friendly design, it meets the water needs of various users while ensuring efficient and reliable operation. Whether for marine use, emergencies, or off-grid living, the MPC-5000 represents a smart investment in sustainable water sourcing.
Top Page Image Contents