Spectra Watermakers MPC-5000 owner manual Introduction to the Ventura 150 MPC

Page 5

Introduction to the Ventura 150 MPC

The Ventura represents the finest watermaker for small and midsized yachts available today. The Spectra Clark Pump is matched to a 21” high rejection membrane. Properly installed and maintained it will supply years of reliable service. The MPC-5000 control provides the ultimate in operational convenience and reli- ability. Note that prudent operation is required with any marine equipment. Always maintain enough reserve

water to get safely into your next port.

The Spectra High Pressure Intensifier, known as the Clark

 

 

Pump, was introduced in 1997 and has continually im-

 

 

proved since. It holds a lifetime warranty for the original

Front View

 

purchaser! It is built of modern non-corroding composites.

Pressure relief valve

Quick disconnect fitting to

 

 

facilitate maintenance.

 

 

Double rubber mounts to

 

 

absorb vibration

 

 

Rear view

The Clark Pump membrane module.

Pre-mounted and plumbed together as a single unit.

Saves time and adds reliability.

Ventura feed pump inlet module.

Includes the feed pump, cooling fan, charcoal filter for the flushing system, manual flush valve, service valve and service port . Compact and streamlined plumbing. Feed pump may be removed and relocated if necessary. Cooling fan is included for long life.

5

Image 5
Contents Page Page Table of Contents Page Water to get safely into your next port Introduction to the Ventura 150 MPCVentura MPC Shipping List Getting StartedWiring Installation BasicsRead the directions Thru-hullsSea Strainer, Mount with Ventura 150 MPC PlumbingFeed Pump Relocation Product to tank Product Water PlumbingBody Nut Dissemble fitting components Tubing Max Product Tube Fitting AssemblyMembrane Pressure Vessel Relocation Correct torque is specification is 85 foot pounds Spectra High Pressure Tube Fitting AssemblyTotal length for a pair of wires MPC-5000 WiringClark Pump Harness Tank Switch Installation and Operation Page Ventura MPC New System Start-Up and Testing Page Salinity MPC Display ModesVentura MPC Dry Testing With Artificial Ocean Ventura MPC Operation Normal operation Automatic Store Cycle Flush Cycle AdjustmentManual Automatic Operation Manual OperationSystem Storage or Pickling Long Term Storage ProceduresClean Up Ventura MPC Storage ProcedureWinterizing Seawater Strainer Maintenance GeneralPrefilters Oil Water Separator OptionalMembranes Membrane CleaningDo not Close the pressure relief valve Cleaning ProcedureSpectra Watermakers recommended spare parts Suggested Spares Ventura MPCVentura MPC Troubleshooting Procedures Error Messages Accumulator Pressure OP-2 BAD Smelling Product Water OP-3 Chemicals OP-4 Fresh Water Flush PF-3 PREFILTERS- ShurFlo SF-1 Shurflo Pump WON’T RUN SF-2 Adjust Shurflo Pressure Switch HS LF-1 Poor Product Quality HS LF-2 Flow TEST/ Shurflo Brane Operation Manual Brane Power Harness Do not Disconnect Or Splice ANY High Voltage Wiring Part Numbers PL-TEE-1/2FN Part NumbersPL-CKV-1/4M-F PL-NLT-1/2HP EL-FP-FPHS Clark Pump Front View Reversing Valve End Blocks Parts Center BlockCylinder Assembly

MPC-5000 specifications

The Spectra Watermakers MPC-5000 is a highly efficient water desalination system designed for a variety of applications, including marine, off-grid, and emergency situations. Known for its reliability and innovative technology, the MPC-5000 stands out as one of the leading solutions for producing fresh water from saltwater.

One of the main features of the MPC-5000 is its impressive production capacity. Capable of producing up to 5,000 gallons of fresh water per day, this system is well-suited for larger vessels or facilities with significant water needs. This robust output makes it an ideal choice for yachts, research vessels, and even small communities in remote areas.

The MPC-5000 utilizes advanced reverse osmosis technology, a process that efficiently separates salt and impurities from seawater. This technique not only ensures high-quality drinking water but also operates at lower energy consumption compared to traditional desalination methods. By employing a state-of-the-art energy recovery device, the MPC-5000 maximizes energy efficiency, significantly reducing operational costs and environmental impact.

In terms of build quality, the MPC-5000 is constructed with marine-grade materials to withstand harsh conditions, making it durable and reliable for long-term use. Its compact design allows easy installation on various platforms, and the system can be operated either through AC or DC power sources, providing flexibility for diverse applications.

The onboard controls of the MPC-5000 are user-friendly, featuring a digital display that provides real-time data on system performance, water production rates, and maintenance alerts. This intuitive interface simplifies operation and monitoring, ensuring users can quickly identify and address any issues.

Another noteworthy characteristic is its low maintenance requirement. The MPC-5000 is designed for easy serviceability, allowing users to conduct routine maintenance with minimal downtime. The integrated filtration system and user-replaceable membrane further enhance its appeal, offering convenience without sacrificing performance.

In conclusion, the Spectra Watermakers MPC-5000 is a standout solution in the water desalination market. With its impressive production capacity, advanced technology, durable construction, and user-friendly design, it meets the water needs of various users while ensuring efficient and reliable operation. Whether for marine use, emergencies, or off-grid living, the MPC-5000 represents a smart investment in sustainable water sourcing.