Skuttle Indoor Air Quality Products 60-2, F60-2 warranty Contractor

Page 15

5.Place the 8" long S-Cleats on the narrow sides of the opening in the duct, with the slots protruding down and out. Place the 10-1/2" long S-Cleat on the longer side, closest to the center of the duct, in the same way as the shorter S-Cleats.

6.Adjust the water level. (See #8 in “How To Maintain a Skuttle Steam Humidifier”, pg. 25.)

7.Slide the flanges of the reservoir into the S-Cleats until the mounting bracket comes in contact with the side of the duct.

8.Secure the humidifier to the plenum with the screws provided.

CONTRACTOR

15

Image 15

Contents Skuttle Homeowner Wiring without Air Conditioning External Relay Warranty Validation Skuttle Limited One-Year Product Warranty Page Safety Precautions How to Install a Skuttle Model 60-Series Steam HumidifierTools and Materials Needed Selecting a Location Mounting the Humidifier Contractor Option B External Side Mount Contractor Option C Duct Center Mount Contractor Option D Internal Side Mount Contractor Connecting to a Power Source Wiring the Air Mover Page Wiring the Fan Switch Plumbing and Setting the Water Level Lowering the Water Level Page How To Maintain a Skuttle Steam Humidifier Page See Plumbing and Setting Water Trouble ShootingModels 60-1 and F60-1 Replacement PartsModels 60-2 and F60-2 Maintenance Record How Your Humidifier Works HomeownerHow To Extend the Life of Your Humidifier General Info FAQs about IAQShould I run my humidifier during the summer months? Skuttle Automatic Flushing Timer Skuttle Model 216 Make-Up Air Control Help Homeowners Breathe Easier Skuttle Air Cleaners Skuttle High-Efficiency Air CleanersSkuttle Happy House Your Assurance of Enhanced IAQ HumidificationFiltration Ventilation Skuttle