Skuttle Indoor Air Quality Products 60-2, F60-2 warranty

Page 24

10.Check the two compression fittings – one at the saddle valve, the other at the float valve. Stop any leakage by tightening the fitting.

11.Connect the humidifier's overflow provision to a suitable waste drain.

•A standard garden hose or a 3/8" N.P.T. male fitting (not supplied) can be attached to the overflow fitting.

•Provide support at many points along the hose to prevent kinks – particularly near any heat source.

12.Turn the water to the humidifier on. The float valve should shut the water off at 2-3/8".

13.Make sure the humidifier is plugged into a powered outlet.

14.Adjust the humidistat according to instructions provided with the humidistat.

NOTE: See “How To Maintain the Skuttle Steam Humidifier” (next section) for additional information.

24

Image 24

Contents Skuttle Homeowner Wiring without Air Conditioning External Relay Warranty Validation Skuttle Limited One-Year Product Warranty Page How to Install a Skuttle Model 60-Series Steam Humidifier Safety PrecautionsTools and Materials Needed Selecting a Location Mounting the Humidifier Contractor Option B External Side Mount Contractor Option C Duct Center Mount Contractor Option D Internal Side Mount Contractor Connecting to a Power Source Wiring the Air Mover Page Wiring the Fan Switch Plumbing and Setting the Water Level Lowering the Water Level Page How To Maintain a Skuttle Steam Humidifier Page Trouble Shooting See Plumbing and Setting WaterReplacement Parts Models 60-1 and F60-1Models 60-2 and F60-2 Maintenance Record Homeowner How Your Humidifier WorksHow To Extend the Life of Your Humidifier FAQs about IAQ General InfoShould I run my humidifier during the summer months? Skuttle Automatic Flushing Timer Skuttle Model 216 Make-Up Air Control Skuttle High-Efficiency Air Cleaners Help Homeowners Breathe Easier Skuttle Air CleanersSkuttle Happy House Your Assurance of Enhanced IAQ HumidificationFiltration Ventilation Skuttle