Skuttle Indoor Air Quality Products 60-2, F60-2 warranty Tools and Materials Needed

Page 8

Tools and Materials Needed

1.Safety goggles

2.Tin snips or aviation snips

3.Electric drill

4.3/8" and 7/64" drill bits

5.Pliers

6.Screwdriver (medium flat point and Phillips #1)

7.Level

8.Hammer

9.Small adjustable wrench

10.Center punch

11.Knife

12.Wire and hardware to connect Fan Control

13.Additional relay or fan sail switch as described under “Wiring the Air Mover”

For some installations:

14.Duct tape

15.1/4" copper water line

16.Tubing and fittings for the overflow connection

17.2 conductor low-voltage wire

8

Image 8

Contents Skuttle Homeowner Wiring without Air Conditioning External Relay Warranty Validation Skuttle Limited One-Year Product Warranty Page How to Install a Skuttle Model 60-Series Steam Humidifier Safety PrecautionsTools and Materials Needed Selecting a Location Mounting the Humidifier Contractor Option B External Side Mount Contractor Option C Duct Center Mount Contractor Option D Internal Side Mount Contractor Connecting to a Power Source Wiring the Air Mover Page Wiring the Fan Switch Plumbing and Setting the Water Level Lowering the Water Level Page How To Maintain a Skuttle Steam Humidifier Page Trouble Shooting See Plumbing and Setting WaterReplacement Parts Models 60-1 and F60-1Models 60-2 and F60-2 Maintenance Record Homeowner How Your Humidifier WorksHow To Extend the Life of Your Humidifier FAQs about IAQ General InfoShould I run my humidifier during the summer months? Skuttle Automatic Flushing Timer Skuttle Model 216 Make-Up Air Control Skuttle High-Efficiency Air Cleaners Help Homeowners Breathe Easier Skuttle Air CleanersFiltration Skuttle Happy House Your Assurance of Enhanced IAQHumidification Ventilation Skuttle