Wayne-Dalton 3750-372, 3012, 3014, 3651-372 installation instructions Brackets Wall Mounting NUT

Page 3

Step 1: Photoelectric Safety Sensor Bracket Installation

WARNING DISCONNECT ALL POWER TO

GARAGE DOOR OPENER BEFORE SERVICING OR INSTALLING ACCESSORIES OR PHOTOELECTRIC SAFETY SENSORS. FOR ALL OPENERS, UNPLUG 120 V AC POWER CORD FROM RECEPTACLE. FOR DOORMASTER,ALSO UNPLUG TELEPHONE CORD TYPE COMMUNICATIONS CABLE.

Select a mounting position, no more than 5 inches above the floor to center line of wall mounting bracket. The sending and receiving units should be mounted inside the door opening to minimize any interference by the sun. However, the sensors should be mounted as close to the door track or inside edge of the door as possible to offer maximum entrapment protection. It is very important that both wall brackets be mounted at the same height for proper alignment.

The brackets may be temporarily mounted to the jamb with a 1” flat head nail (provided) using the small hole above the slot. Using two 5/16 x 1-1/2” lag screws (provided), permanently mount the wall mounting brackets to both door jambs. In some installations it may be necessary to attach a wooden spacer to the wall to achieve the required clearance.

Attach the “U” brackets to the wall brackets with a 1/4-20 carriage bolt, washer and nut (provided). Insert

the bolt from the inside of the “U” bracket and hand tighten only at this time.

Identify which side of the garage door opening (if any) is “likely” to be exposed to sunlight. Since sunlight may affect photoelectric sensors, you should mount the sending unit (not the receiving unit) on the side of the door opening exposed most to the sun.

NOTE: If wires must be lengthened or spliced into prewired installation, use wire nuts or suitable connectors.

Attach the sending and receiving units to the “U” brackets by inserting their tabs into the respective holes.

3

 

“U” BRACKETS

 

 

 

WALL MOUNTING

 

 

BRACKETS

NUT

(1) 5/16 X 1-1/2”

 

LAG SCREW

NAIL

WASHER

 

 

 

5”

 

(1)1/4-20 X 1/2”

 

CARRIAGE BOLT

 

TAB HOLES

 

 

TOP & BOTTOM

 

 

 

TABS

 

 

TOP & BOTTOM

RECEIVING UNIT

 

 

 

SENDING

 

 

UNIT

 

 

(NO LED)

 

 

LED ALIGNMENT

 

 

LIGHT

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Opener Models Photoelectric Safety SensorsTable of Contents Important Safety Instructions for Installation and USEBrackets Wall Mounting NUT Photoelectric Safety Sensor Wiring Installation For Quantum/ClassicdriveDoorMaster Torsion idrive Idrive models 3660-372, 3661-372, 3662-372, 3760-372Torsion idrive models 3651-372 IdrivePhotoelectric Obstruction Sensing Test Photoelectric Safety Sensor AlignmentImportant Safety Instructions

3750-372, 3651-372, 3012, 3014 specifications

Wayne-Dalton is a renowned manufacturer in the garage door industry, offering a wide range of products that cater to various needs. Among their most notable models are the Wayne-Dalton 3014, 3012, 3651-372, and 3750-372 garage doors. Each model brings unique features and technologies designed for durability, aesthetics, and functionality.

The Wayne-Dalton 3014 model is characterized by its exceptional durability and design versatility. It features a steel construction that promotes long-lasting performance, ensuring it can withstand the rigors of everyday use. The door is available in a variety of colors and finishes, allowing homeowners to find the perfect match for their home’s exterior. Additionally, it comes equipped with insulation options that enhance energy efficiency, helping to keep garages comfortable year-round.

The Wayne-Dalton 3012 model emphasizes simplicity and reliability. With a classic design that pairs well with traditional architecture, this model is perfect for homeowners seeking a timeless look. It also features sturdy construction materials that provide added security against potential intrusions. The 3012 model is designed with low maintenance in mind, making it an excellent choice for those who prefer functionality without the hassle.

The 3651-372 model takes performance to the next level. It is constructed with advanced materials that ensure superior strength and insulation properties. This model is particularly beneficial for homes in areas with extreme weather conditions. It also includes modern technology such as smart garage door openers, enabling homeowners to control their garage doors remotely via mobile apps, thus enhancing convenience and security.

Lastly, the Wayne-Dalton 3750-372 model features over-head door technology that enhances its efficiency and reliability. This model incorporates a multi-layer construction approach, combining steel, insulation, and a wood appearance vinyl overlay. This not only offers aesthetic appeal but also provides exceptional insulation, keeping the garage temperature stable. The 3750-372 model can also be customized with various windows and decorative hardware options, allowing homeowners to personalize their garage doors to suit their style.

In summary, Wayne-Dalton's range of models, including the 3014, 3012, 3651-372, and 3750-372, exemplifies quality craftsmanship, advanced technology, and customizable features. These models cater to a variety of preferences, ensuring that there’s a perfect garage door solution for every homeowner.
Top Page Image Contents