Wayne-Dalton 46 installation instructions Counter Installation, Securing Center Bracket Bushing

Page 25

 

 

23

Counter Installation

 

 

 

Tools Needed:

Install the right side counter gear, with

None

the missing tooth toward the outside

 

and away from the end bracket. Press

 

the counter gear onto the end bracket

 

until snaps engage.

 

Select the right hand counter cover and

 

align the hex of the counter cam with

 

the end of the winding shaft. Also, align

 

the “0” on the counter cover with the

 

raised rib on the end bracket. Press the

 

counter cover against the counter gear

 

until it locks into place.

 

Repeat on left hand side for double

 

spring applications.

 

NOTE: No drive gear, counter gear or

 

counter cover is required on left hand

 

side for single spring applications. Only

 

an end bracket is needed.

 

IMPORTANT: At this time do not

 

wind Counterbalance Springs!

 

 

Raised Rib

Winding

Shaft Inside

End Bracket

Counter

Gear Missing

Tooth Counter

Cover

Hex of the

Counter Cam

INSTALLATION

24

Securing Center Bracket Bushing

 

 

CENTER

Tools Needed:

®

BRACKET

NOTE: If you are installing an idrive opener on your

ASSEMBLY

Power Drill

garage door, skip this step and continue with Step 25.

 

 

 

3/16” Drill Bit

NOTE: If you are not installing an idrive® opener on

 

your garage door, you must install the center bracket

 

 

 

7/16” Socket

bushing assembly. Follow these instructions for

 

Driver

non-idrive®operated garage doors.

 

NOTE: If you are installing a DoorMaster™ opener, see optional DoorMaster™ Bracket installations on page 33, Figure B.

IMPORTANT: TorqueMaster® Spring Tube must be level after center bracket assembly is fastened to header.

To locate the center bracket, mark the header halfway

 

between the flagangles and level the TorqueMaster®

 

spring tube. Drill pilot holes into header for the lag

 

screws. Fasten the metal bracket to the header using

(2) 5/16” x 2” hex

(2) 5/16” x 2” hex head lag screws.

 

head lag screws

NOTE: Upon completion of this step, continue with

Step 29.

25

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Portland Source Plant Series, ModelTable of Contents Package Contents Door Section Identification Package ContentsTools Required Failure to use approved Torsion Spring Removal For Standard LiftWinding bars can cause spring Door agency release the tensionTorqueMaster Spring Removal Either direction. If the counterbalance Assembly off the flagangles and outLeft hand side Applications, repeat for left hand sideRemoving the Old Door Extension Spring RemovalFailure to Preparing the OpeningSecurely attach a Suitable mounting pad to structurallyFlagangle to Vertical Track Attaching Fully AdjustableBrackets Installing Fully Adjustable JambBottom Bracket Left hand DrumsCounterbalance Roller Hinge tubeHinges Step Plate Top BracketInstallation on all other Installation on the Top SectionAbove top bracket and secure with All glazed doors starting at 14’0 widthBottom Section Lift HandleStacking Sections Vertical TrackTop Section Horizontal Track Adjusting Top BracketsCenter Bracket Bushing TorqueMaster Spring TubePlug the motor power cord into Opener Idrive InstallationOpener back and forth slightly to help Aid alignmentCable Drum Installation End Brackets Drive Gear InstallationSecuring Center Bracket Bushing Counter InstallationPositioning Support Bracket Handle Bracket Mounting DisconnectDisconnect handle bracket. Tighten Attaching Disconnect HandleHandle until snug, and then tighten Secure disconnect cable toSecuring Door Cable AdjustmentsFor Spring Winding Setting Spring Tension Ing adjustments toWinding Bolt Rotation Prior to winding or makRear Support Drum Wrap InstallationKeep horizontal track Parallel and within 3/4Otherwise, the spring fittings Installation InstructionsMay release from spring If not wound in the properSide Lock Pull Rope Trolley Operator Cleaning Your Garage Door CleaningPainting Limited Warranty Models 8000, 8100, 8200 Thank you for your purchase
Related manuals
Manual 36 pages 28.31 Kb

46 specifications

Wayne-Dalton 46 is a prominent garage door model known for its unique combination of durability, aesthetic appeal, and advanced technology. Designed specifically for residential properties, this door offers homeowners an array of features that enhance the overall functionality and style of their garages.

One of the standout characteristics of the Wayne-Dalton 46 is its construction. Made with high-quality materials, these doors are crafted to withstand various weather conditions. They are built using a steel frame, which provides structural integrity and support, while the insulated core helps to maintain energy efficiency in the home. The insulation also minimizes noise from outside, creating a peaceful environment within the garage.

In terms of style, the Wayne-Dalton 46 offers multiple design options to suit different architectural preferences. Homeowners can choose from various panel styles and colors, allowing for customization that complements the exterior of their homes. The door can be finished with a smooth or textured surface, adding to its visual appeal. Additionally, the Wayne-Dalton 46 features decorative hardware options, providing a touch of elegance and sophistication.

Technological innovation is another key aspect of the Wayne-Dalton 46. Equipped with the latest in garage door technology, these doors come with advanced safety features, including pinch-resistant construction, which helps to prevent injuries during operation. The door’s reliable opening mechanism ensures smooth and quiet operation.

Wayne-Dalton also incorporates smart technology into the 46 model. Homeowners have the option to equip their garage doors with Wi-Fi connectivity, allowing them to control the door remotely via smartphone apps. This feature adds convenience and security, enabling users to monitor their garage door's status and receive alerts in real time.

Maintenance of the Wayne-Dalton 46 is straightforward, thanks to its durable finish, which resists rust and corrosion. Regular inspections and basic upkeep will ensure longevity, providing a reliable garage door solution for years to come.

Overall, the Wayne-Dalton 46 stands out in the market for its impressive blend of style, durability, advanced features, and safety technology, making it an excellent choice for homeowners looking to enhance the appeal and functionality of their garages.
Top Page Image Contents