Admiral AAW-18CM3FHU, AAW-24CM3FHU, AAW-24CR3FHU, AAW-10CM1FHU manual Electronic control panel model

Operating Instructions

Electronic control panel model

Control Panel

You can easily operate this air conditioner by pressing relevant button on the control panel as well as the remote control.

Button

The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button. When the air conditioner is heating, allow 3 minutes after you press this button.

Airconditioner

Timer

Mode button

Fan

Mode

Speed

Each time MODE button is pressed, the operation

mode is changed in sequence:

COOL: COOLINGFAN ONLYENERGY SAVING

COOLING

HEAT: COOLING FAN ONLY HEATINGENERGY SAVING

COOLING

Indication symbols of LED on control panel:

NOTE: After setting the mode, allow 3 minutes before

switching to another mode.

In the FAN ONLY Mode, Room Temperature display range is from 0 (32 ) to 38 (99 ).

Room Temperature below 32 ,the Temperature display L0. Room Temperature above 99 ,the Temperature display H1.

Auto fan speed	Cooling
	F
	h
Low fan speed	Fan only
	Display set temp
Medium fan speed	Display set timer
	Heating

High fan speed Energy-saving

Fan Speed button

Used to select fan speed in sequence auto, low, medium and high.

Timer

Above LED lights on when the relevant mode is in used.

Timer button

Used to set or cancel timer operation.

When the unit is in operation, you can set OFF TIMER.

When the unit is off, you can set ON TIMER.

Timer setting range is 0 to 24 hours.

If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only

12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be canceled.

If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you wantto cancel ON TIMER, press TIMER button.

Button

Used to set room temperature in COOLING mode or used to set time in TIMER mode.

If the two keys are pressed at the same time, the temperature LED display will alternate between and .

NOTE: Temperature setting range is from19 (66 ) to 31 (88 ).

12