WAC 8-24 USER MAN FINAL 3/2/05 12:13 PM Page 16
OPERATING INSTRUCTIONS
➤ELECTRONIC CONTROL PANEL MODEL
Electronic Control Panel Model
You can easily operate this air conditioner by pressing relevant button on the control panel as well as the remote control.
Button
The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button.
Mode button
Each time Mode button is pressed, the operation mode is changed in sequence:
COOLING FAN ONLY ENERGY SAVING COOLING
NOTE: After setting the mode, allow three (3) minutes before
NOTE: After setting the mode, allow 3 minutes before
switching to another mode. In the FAN ONLY Mode, Room switching to another mode.
Temperature display range is from 0°C (32°F) to 38°C (99°F). In the FAN ONLY Mode, Room Temperature display range
Room Temperature below 32°F, the Temperature display L0. is from 0 (32 ) to 38 (99 ).
Room Temperature above 99°F, the Temperature display H1. Room Temperature below 32 ,the Temperature display L0.
Control Panel
Airconditioner
Timer
Fan
Mode
Speed
Indication symbols of LED on control panel :
Auto fan speed | Cooling | |
Low fan speed | Fan only | |
Display set temp | ||
| ||
Medium fan speed | Display set timer | |
Timer |
Room Temperature above 99 ,the Temperature display H1.
High fan speed |
Fan Speed button
Used to select fan speed in sequence auto, low, medium and high.
Heating
LED on control panel lights on when the relevant mode is in used.
Timer button
Used to set or cancel timer operation.
When the unit is in operation, you can set OFF TIMER.When the unit is off, you can set ON TIMER.Timer setting range is 0 to 24 hours.
If thethe OFFOFF TITIMERER isis set,set,thethetimertime LEDLED displaysdisplaysthetheremainingremainingtimetimetototurnturnoffoffthetheunitunitforforonlyonly12 seconds,12 seconds, then LED shiftsifts totodisplaydisplaysetsetemperaturetemperature. If. IfyouyoupresspressTIMERTIMERbuttonbuttonwithinwithinthethe12 12seconds,seconds,OFFOFFTIMERTIMER willill bee cancelledcancelled. .
If the ON TIMER is set, the timer LED displays the remaining time to tourn on the unit. If you want to cancel
If the ON TIMER is set, the timer LED displays the remaining time turn on the unit. If you want to cancel ON TIMER, press TIMER button.
ON TIMER, press TIMER button.
Button
Used totosetsetroomroomtemperaturetemperatureininCOCOOLINGLING modemodeororusedusedto tosetsettimetimein TIMERin TIMERmodemode. .
If thethe twotwokeyskeysareareprespresseded atathethesamesametime,thetime, thetemperaturetemperatureLEDLEDdisplaydisplaywill alternatewill alternatebetwebetweenn and°C and. °F.
NOTE: Temperature setting range is from 19 (66 ) to 31 (88 ).
NOTE: Temperature setting range is from 19°C (66°F) to 31°C (88°F).
14