Cooper Lighting CSV278W instruction manual For best results

Page 3
Solid house supply wire
Solid
fixture
wire

SV278/SV278W I.S. 10/21/03 11:12 AM Page 3

•This motion activated twin floodlight should be installed by persons with experience in house- hold wiring or by a qualified electrician. The electrical system, and the method of electrically connecting the fixture to it, must be in accordance with the National Electrical Code and local building codes.

•Use only with a 100 watt or smaller wattage bulb. Installing a bulb of higher wattage could create a fire hazard. Use of a higher wattage bulb will void the warranty.

•Never touch the bulb with your bare hands, as oil from your skin can cause premature failure. Always handle the bulb with gloves or a soft cloth.

•For supply connections, use wire rated at least 75 degrees C.

•For proper operation and protection against damage, the motion sensor head adjustment knobs must be facing the ground.

•In the event of lens breakage, contact Customer Service for ordering assistance.

•Disassembly of your fixture will void the warranty.

SAVE THESE INSTRUCTIONS.

For best results

 

• Install your fixture 8-12 feet above ground (motion detector is less

 

sensitive above 12 feet).

 

• Locate fixture so motion moves across detection zone (L).

 

• Locate fixture away from heat producing sources to prevent

 

false triggering. Also be very careful not to include objects such as win-

L

dows, white walls and water in the detection zone whenever possible.

 

•Locate fixture away from moving objects such as trees and street traffic.

•Do not install more than one motion detector on one wall switch.

Installing your bulb

Step 1: Remove the lens cover by twisting it one-half turn counterclockwise.

Step 2: Using gloves or a soft cloth, gently insert bulb into housing. NOTE: Align two pins

located on the sides of the bulb with two small

Your fixture mounts to the

slots in the socket, press bulb into spring loaded

socket and twist a half turn clockwise, until firmly

following standard junction boxes:

seated. Repeat this procedure for the other light.

 

 

Step 3: Replace the lens (making sure the gasket is in

 

 

place) by aligning the notches on the housing with

 

 

the cover and pressing while turning one-half turn

Round

Rectangular (horizontal) Octagonal

clockwise until seated.

 

 

ENGLISH

Mounting your fixture

Step 1: Turn off the power at the main fuse/breaker box.

Step 2: Line up the holes on the mounting bracket with the holes on your junction box. Using either (2) #6 screws or (2) #8 screws (depending on size of the holes in your junction box), attach the mounting bracket to your junction box (M).

Step 3: Hang one end of the mounting hook onto the mounting bracket (using the hole in the bracket, see drawing), and hang the light fixture on the other end of the mounting hook. NOTE: Carefully hang the fixture at the base of the lampholder assembly as shown. This will free-up your hands for wiring.

Step 4: Thread fixture wires through coverplate gasket.

Step 5: If the supply wires coming from your house are solid, you can use the Quick-connect™ wire system to attach your Regent light

fixture. NOTE: Quick connectors can only be used with solid wire supply leads. Simply insert the black supply wire from your house into the quick connector with black wire coming from the fixture.

Repeat for house white wire, matching to the connector with the white wire. Push both wires firmly into holes to insure that they are seated properly and securely (N). It’s that easy! Proceed to Step 7.

Step 6: If the supply wires coming from your house are stranded, remove the quick connectors from the end of the light fixture wires by turning them repeatedly from left to right while pulling. Repeat until they are both removed. Remember: Quick connectors can only be used with solid wire supply leads. Do not attempt to use with other electrical fixtures! These connectors are designed to withstand the temperature and Voltage requirements of this Regent product only. Once the connectors have been removed, connect black wire to house black wire and connect white wire to house white wire using the wire nuts provided.

M

(wall mount)

(eave mount)

Prewired quick connector

N

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Instrucciones Directives Degrees EnglishFor best results English Installing your light switch coverAuto 4 MIN OFF Auto 12 MIN What to do if Lights will not Respond to Night Time on ModeSetting Lights do not Come onCómo funciona 18mInstalación del foco Para obtener mejores resultadosPaso 5 Si los cables de energía provenientes de su casa son Cómo instalar la cubierta del interruptor de luz Operación de su portalámparasAuto 12 MIN Cómo seleccionar la característica deseadaTest Auto 4 MINQué hacer si Aparente LAS Luces Exteriores SEEncienden Durante LA Noche SIN MotivoTime on Ajuste DEL Modo DE NightCe qu’il faut savoir Comment votre projecteur fonctionneCe dont vous avez besoin Ce qui est compris dans cet ensemblePour de meilleurs résultats Installation de l’ampouleComment faire fonctionner votre dispositif Montage du dispositifLe dispositif peut se monter sur cesComment choisir la bonne fonction Installer le couvre-interrupteurDE Nuit Tous LES ModesAucune Raison Que faire siMarche DE Nuit ’ALLUMENT LA Nuit SansET S’ETEIGNENT Toute LA Mode Crepuscule aMode Time on DE Nuit LES Lumiéres S’ALLUMENTFrançais

SV278W, CSV278W, SV278, CSV278 specifications

Cooper Lighting's CSV278, SV278, SV278W, and CSV278W models represent a significant advancement in lighting technology, tailored for various applications. These fixtures are designed with energy efficiency, optimal performance, and versatile functionality in mind, making them suitable for both commercial and industrial environments.

The CSV278 and SV278 models showcase a sleek, low-profile design coupled with powerful illumination capabilities. They utilize advanced LED technology, providing high lumen output while minimizing energy consumption. This makes them an excellent choice for supermarkets, warehouses, and large retail spaces where bright, consistent lighting is crucial for visibility and safety. The strategic integration of LEDs ensures a longer lifespan and reduced maintenance costs, enhancing the overall value of the lighting solution.

Both series feature customizable options for light distribution, which allows for precise control over how light is spread across the area. This versatility means that these fixtures can be tailored to meet the specific needs of various spaces, whether it be in aisle lighting, task areas, or general ambient illumination. Additionally, the SV278W and CSV278W models are designed for wet or damp locations, offering added durability without compromising performance.

One of the standout features of the Cooper Lighting series is their compatibility with smart lighting controls. These fixtures can be easily integrated into lighting management systems that allow for remote operation, dimming capabilities, and monitoring energy usage. This modern approach aligns with sustainability goals, enabling facilities to reduce their carbon footprint while potentially lowering operating costs.

The construction of the CSV278, SV278, SV278W, and CSV278W fixtures is another aspect that sets them apart. Made from robust materials, they are designed to withstand harsh environments, whether indoors or outdoors. Their durability not only extends their lifespan but also assures reliability in demanding settings.

In summary, Cooper Lighting's CSV278, SV278, SV278W, and CSV278W models are at the forefront of modern illumination solutions. With their energy-efficient LED technology, customizable light distribution, compatibility with smart controls, and robust construction, these fixtures offer an optimal lighting experience tailored to a wide variety of applications. Investing in these advanced lighting solutions ensures that spaces are well-lit, energy-efficient, and conducive to productivity and safety.
Top Page Image Contents