Finish Mounting
❒Align the fixture base plate, gasket, and the junction box holes. Secure with mounting screws that fit your junction box.
❒If not installed on a weatherproof box or if an adaptor plate was used, caulk between the base plate and mounting surface with sili- cone weather sealant.
To avoid water damage and electrical shock, keep lamp holders aimed below horizontal.
Specifications |
|
| |
Range | Up to 100 feet (30.5 m) with | ||
| Range Boost On; up to 70 | ||
| feet (21 m) with Range Boost | ||
| Off. (Varies with surround- | ||
| ing temperature). |
| |
Sensing Angle | Up to 270° |
|
|
Sensor Load Capacity . | Up to 1000 Watts (8.3 amps) | ||
| Maximum, Incandescent | ||
Power Requirements . . | 120 VAC, 60 Hz |
| |
Operating Modes | TEST, | AUTO | and |
| MANUAL OVERRIDE |
| |
Time Delay | 1 , 5, 20 minutes |
| |
Sensitivity | Adjustable |
|
|