Black & Decker BDCF20, BDCF12 manual 12volt max Installation and Removal of the Battery Pack

Page 8

12volt max*

Installation and Removal of the Battery Pack

To install battery pack: Insert battery pack into the flashlight, until an audible click is heard as shown in Figure B.

To remove battery pack: Depress the battery release button as shown in Figure C and pull battery pack out of the flashlight.

B

C

20volt max**

Battery Pack Charging

20volt Max** Charging Procedure

 

Black & Decker chargers are designed to charge Black

D

& Decker battery packs in 5-8 hours depending on the

pack being charged.

 

1. Plug the charger into an appropriate outlet before

 

inserting the battery pack.

 

2. Insert the battery pack into the charger as shown in Figure D.

 

 

 

 

3. The green LED will flash indicating that the battery

 

 

 

 

 

 

 

is being charged.

 

 

 

 

 

 

 

4. The completion of charge is indicated by the green

 

 

 

 

LED remaining on continuously. The pack is fully charged

 

 

 

 

 

 

 

 

and may be used at this time or left on the charger.

 

Recharge discharged batteries as soon as possible

 

 

after use or battery life may be greatly diminished. For longest battery life, do

not discharge batteries fully. It is recommended that the batteries be recharged after

each use.

 

Charger Diagnostics

This charger is designed to detect certain problems that can arise with the battery packs or the power source. Problems are indicated by one LED flashing in different patterns.

Bad battery

The charger can detect a weak or damaged battery. The red LED flashes in the pattern indicated on the label. If you see this bad battery blink pattern, do not continue to charge the battery. Return it to a service center or a collection site for recycling.

Hot/Cold pack delay

When the charger detects a battery that is excessively hot or excessively cold, it automatically starts a Hot/Cold Pack Delay, suspending charging until the battery

has normalized. After this happens, the charger automatically switches to the Pack Charging mode. This feature ensures maximum battery life. The red LED flashes in the pattern indicated on the label.

Leaving the battery in the charger

The charger and battery pack can be left connected with the green LED glowing indefinitely. The charger will keep the battery pack fresh and fully charged.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents BDCF20 20V MAX Catalog NumberSave this manual for Future reference Save all warnings and instructions for future reference Safety Guidelines DefinitionsWork Area Safety Service Read all the instructions before using the applianceImportant Safety Instructions for Battery Chargers Symbols12v Max* Battery Fast Charger 20v Max** Lithium-Ion BatteryFUNCTIONAL DESCRIPTION Lithium 2 Amp Fast ChargerRead all Instructions Storage RecommendationsCharger Diagnostics Bad batteryHot/Cold pack delay Important charging notes12volt max Installation and Removal of the Battery Pack Leaving the battery in the chargerTo remove battery pack Depress Pivoting the 10 LED light housingOperating Instructions On/OFF Button 12VOLT MaxxPivoting the 12 LED light housing 20VOLT MaxxTroubleshooting MaintenanceAccessories Rbrc SealService Information Full Two-Year Home Use Warranty For Service & SalesSee ‘Tools-Electric’ Yellow PagesManuel D’ Instructions De catalogue BDCF12 12V MAXLignes directrices en matière de sécurité définitions Sécurité personnellePage Symboles Conserver CES DirectivesDescription Fonctionnelle AvertissementDirectives de sécurité importantes pour les blocs-piles Lire toutes les directivesRecommandations en matière de rangement Fonctions de diagnostic du chargeur Volts MAX Chargement DU BLOC-PILESPile en mauvais état Fonction de suspension du bloc-piles chaud/froidVolts MAX Insertion ET Retrait DU BLOC-PILES Pose DU BLOC-PILES Insérer le bloc-pilesRetrait DU BLOC-PILES Appuyer sur le 20volt Max** Procédure de chargeBloc-piles laissé dans le chargeur 20volt Max** Insertion et retrait du bloc-piles de l’outilInsertion du bloc-piles Insérer le bloc Retrait du bloc-piles enfoncer le boutonBoitier Pivotant DE Lampe a 12 DEL DE 20 Volts MAX Directives DE Fonctionnement Bouton MARCHE-ARRETBoitier Pivotant DE Lampe a 10 DEL DE 12 Volts MAX Le sceau Rbrc Problème Cause possible Solution possibleDépannage Outils électriques Pour le service et les ventesVoir la rubrique Catálogo N BDCF12 12V MAX Las baterías y los cargadores se venden por separadoPautas DE SEGURIDAD/DEFINICIONES Seguridad eléctricaPage Símbolos Instrucciones de seguridad importantes para las linternasConserve LAS Instrucciones Cargador rápido de baterías de iones de litio de 2 amperios 12 V Máx 20 V MáxBatería de iones de litio de 20 V Máx Advertencia AmperajeLea todas las instrucciones Recomendaciones con respecto al almacenamientoCarga DE Paquete DE Baterías DE 12 Voltios MÁX 20volt Max** Procedimiento de carga Para Extraer EL Paquete DECarga DE Paquete DE Baterías DE 20 Voltios MÁX Dejar la batería en el cargador Para instalar el paquete de Instrucciones DE Operación Botón DE ENCENDIDO/APAGADODE LA Unidad DE 20 Voltios MÁX FigURAMantenimiento OS DE Garantia Ferre Pat de Puebla, S.A. de C.V de Septiembre No

BDCF20, BDCF12 specifications

Black & Decker, a pioneer in power tools and home improvement products, offers a variety of battery-powered tools that cater to both professionals and DIY enthusiasts. Among their impressive lineup, the BDCF20 and BDCF12 models stand out for their innovative features and robust performance.

The Black & Decker BDCF20 is a versatile 20V cordless drill/driver designed to handle a myriad of tasks, making it an essential tool for any home improvement project. It boasts a powerful 20V lithium-ion battery that provides extended runtime and ensures that users can complete their tasks without the hassle of cords. Its lightweight design and ergonomic grip enhance user comfort during prolonged use, reducing fatigue.

One of the standout features of the BDCF20 is its two-speed transmission, which allows users to choose between high speed for drilling and low speed for driving screws. This versatility enables users to tackle a range of applications, from lightweight tasks to more demanding projects. The drill also includes an 11-position clutch that prevents overdriving and stripping screws, ensuring precision in every job.

On the other hand, the Black & Decker BDCF12 is a compact and lightweight 12V cordless drill/driver ideal for light-duty tasks and smaller projects. The 12V lithium-ion battery provides ample power while keeping the weight manageable, making it perfect for users who require a portable tool. The BDCF12 also features an adjustable clutch that allows for greater control and accuracy in drilling and driving applications.

Both models are equipped with exceptional technologies such as LED work lights, which illuminate the work area, making it easier to work in dark spaces. The built-in battery indicator on both drills informs users of the remaining battery life, ensuring they are never caught off guard during critical moments.

The BDCF20 and BDCF12 also highlight Black & Decker's commitment to user safety, featuring a safety lock-off switch that prevents accidental activation. Their durable construction ensures they can withstand the rigors of frequent use while delivering reliable performance.

In summary, the Black & Decker BDCF20 and BDCF12 are exemplary tools that merge power and convenience. Whether you are a serious DIYer or a professional contractor, these models provide the features and technologies needed to get the job done efficiently and effectively. With a reputation for quality, Black & Decker continues to be a trusted name in the toolbox of many.
Top Page Image Contents