Black & Decker BDCF20, BDCF12 manual Read all Instructions, Storage Recommendations

Page 6

•Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.

•Do not mount charger on wall or permanently affix charger to any surface. The charger is intended to use on a flat, stable surface (i.e., table top, bench top).

•Do not operate charger with damaged cord or plug — have them replaced immediately.

•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center.

•Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

•Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

•NEVER attempt to connect 2 chargers together.

•The charger is designed to operate on standard household electrical power (120 Volts). Do not attempt to use it on any other voltage.

SAVE THESE INSTRUCTIONS Important Safety Instruction for Battery Packs

WARNING: For safe operation, read this manual and manuals originally supplied with tool before using the charger.

The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below. Then follow charging procedures outlined.

Read all Instructions

• Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when battery packs are burned.

• Do not charge or use battery in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery from the charger may ignite the dust or fumes.

• If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte for Lithium-Ion batteries is composed of a mixture of liquid organic carbonates and lithium salts.

• Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame.

• Charge the battery packs only in Black & Decker chargers.

• DO NOT splash or immerse in water or other liquids. This may cause premature cell failure.

• Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40˚C) (such as outside sheds or metal buildings in summer). WARNING: Never attempt to open the battery pack for any reason. If battery pack

case is cracked or damaged, do not insert into charger. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way (i.e., pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be returned to service center for recycling.

WARNING: Fire hazard. Do not store or carry battery so that metal objects can contact exposed battery terminals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit. NOTE: Lithium-Ion batteries should not be put in checked baggage.

Storage Recommendations

1. The best storage place is one that is cool and dry away from direct sunlight and excess heat or cold. 2. Long storage will not harm the battery pack or charger.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Catalog Number Save this manual for Future referenceBDCF20 20V MAX Safety Guidelines Definitions Work Area SafetySave all warnings and instructions for future reference Service Read all the instructions before using the applianceImportant Safety Instructions for Battery Chargers SymbolsFUNCTIONAL DESCRIPTION 12v Max* Battery Fast Charger20v Max** Lithium-Ion Battery Lithium 2 Amp Fast ChargerRead all Instructions Storage RecommendationsHot/Cold pack delay Charger DiagnosticsBad battery Important charging notes12volt max Installation and Removal of the Battery Pack Leaving the battery in the chargerOperating Instructions On/OFF Button To remove battery pack DepressPivoting the 10 LED light housing 12VOLT MaxxPivoting the 12 LED light housing 20VOLT MaxxAccessories TroubleshootingMaintenance Rbrc SealSee ‘Tools-Electric’ Service Information Full Two-Year Home Use WarrantyFor Service & Sales Yellow PagesManuel D’ Instructions De catalogue BDCF12 12V MAXLignes directrices en matière de sécurité définitions Sécurité personnellePage Symboles Conserver CES DirectivesDescription Fonctionnelle AvertissementDirectives de sécurité importantes pour les blocs-piles Lire toutes les directivesRecommandations en matière de rangement Pile en mauvais état Fonctions de diagnostic du chargeurVolts MAX Chargement DU BLOC-PILES Fonction de suspension du bloc-piles chaud/froidRetrait DU BLOC-PILES Appuyer sur le Volts MAX Insertion ET Retrait DU BLOC-PILESPose DU BLOC-PILES Insérer le bloc-piles 20volt Max** Procédure de chargeInsertion du bloc-piles Insérer le bloc Bloc-piles laissé dans le chargeur20volt Max** Insertion et retrait du bloc-piles de l’outil Retrait du bloc-piles enfoncer le boutonDirectives DE Fonctionnement Bouton MARCHE-ARRET Boitier Pivotant DE Lampe a 10 DEL DE 12 Volts MAXBoitier Pivotant DE Lampe a 12 DEL DE 20 Volts MAX Problème Cause possible Solution possible DépannageLe sceau Rbrc Pour le service et les ventes Voir la rubriqueOutils électriques Catálogo N BDCF12 12V MAX Las baterías y los cargadores se venden por separadoPautas DE SEGURIDAD/DEFINICIONES Seguridad eléctricaPage Instrucciones de seguridad importantes para las linternas Conserve LAS InstruccionesSímbolos 12 V Máx 20 V Máx Batería de iones de litio de 20 V MáxCargador rápido de baterías de iones de litio de 2 amperios Advertencia AmperajeLea todas las instrucciones Recomendaciones con respecto al almacenamientoCarga DE Paquete DE Baterías DE 12 Voltios MÁX Para Extraer EL Paquete DE Carga DE Paquete DE Baterías DE 20 Voltios MÁX20volt Max** Procedimiento de carga Dejar la batería en el cargador Para instalar el paquete de Instrucciones DE Operación Botón DE ENCENDIDO/APAGADODE LA Unidad DE 20 Voltios MÁX FigURAMantenimiento OS DE Garantia Ferre Pat de Puebla, S.A. de C.V de Septiembre No

BDCF20, BDCF12 specifications

Black & Decker, a pioneer in power tools and home improvement products, offers a variety of battery-powered tools that cater to both professionals and DIY enthusiasts. Among their impressive lineup, the BDCF20 and BDCF12 models stand out for their innovative features and robust performance.

The Black & Decker BDCF20 is a versatile 20V cordless drill/driver designed to handle a myriad of tasks, making it an essential tool for any home improvement project. It boasts a powerful 20V lithium-ion battery that provides extended runtime and ensures that users can complete their tasks without the hassle of cords. Its lightweight design and ergonomic grip enhance user comfort during prolonged use, reducing fatigue.

One of the standout features of the BDCF20 is its two-speed transmission, which allows users to choose between high speed for drilling and low speed for driving screws. This versatility enables users to tackle a range of applications, from lightweight tasks to more demanding projects. The drill also includes an 11-position clutch that prevents overdriving and stripping screws, ensuring precision in every job.

On the other hand, the Black & Decker BDCF12 is a compact and lightweight 12V cordless drill/driver ideal for light-duty tasks and smaller projects. The 12V lithium-ion battery provides ample power while keeping the weight manageable, making it perfect for users who require a portable tool. The BDCF12 also features an adjustable clutch that allows for greater control and accuracy in drilling and driving applications.

Both models are equipped with exceptional technologies such as LED work lights, which illuminate the work area, making it easier to work in dark spaces. The built-in battery indicator on both drills informs users of the remaining battery life, ensuring they are never caught off guard during critical moments.

The BDCF20 and BDCF12 also highlight Black & Decker's commitment to user safety, featuring a safety lock-off switch that prevents accidental activation. Their durable construction ensures they can withstand the rigors of frequent use while delivering reliable performance.

In summary, the Black & Decker BDCF20 and BDCF12 are exemplary tools that merge power and convenience. Whether you are a serious DIYer or a professional contractor, these models provide the features and technologies needed to get the job done efficiently and effectively. With a reputation for quality, Black & Decker continues to be a trusted name in the toolbox of many.
Top Page Image Contents