Lindy Carbon Monoxide Alarm user manual Filter messages, Display in the Confirm menu

Filter messages

08 17s temperatu

Enter

Display in the “Confirm“ menu

F03:*off humidit

F03: no confirm

Entering network parameters

	Enter
I192.168.018.103
IP: 192.168.018.103 OK	Enter

Enter

Enter

Filter messages are displayed on the LCD display as follows:

<Message number> (2-digit) blank

<Time> (2-digit)

<Unit of time> (s; m = min; h; d) Blank

<Filter-designation> (9-digit)

• Confirm filter messages with the ENTER key.

In the “Message Log” (> 4.10) the message is marked accordingly in the “Ack” column with an “x”.

For the filter message to be displayed, it is necessary for the “Message 19 Priority” other than “none” to be assigned in the “Filter

Configuration” menu (> 4.9.2).

<Filter-Number> („F“; 2-digit; “:“) * (only with confirmed filter)

<Current filter result > (3-digit: “off“ or “on“) Blank

<Filter-designation> (9-digit)

For the display, it is necessary for “Confirmation” “yes” to be assigned in the “Filter Configuration” menu (> 4.9.2). Otherwise, the message "no confirm" appears.

If a connection via the COM interface is not possible, the following four network parameters must be entered via the keys before the device can be operated with Telnet:

–IP address

–Netmask

–Broadcast

–Gateway

If one of these menu items is selected in the LCD display, the first position flashes after confirmation.

•Select the desired parameter with the arrow keys (the position selected flashes) and confirm with the ENTER key.

•Change the value of the selected parameter using the arrow keys (the parameter flashes) and confirm with the ENTER key.

Leave the numerical input:

• Select "OK" with the arrow keys and confirm with the ENTER key.

MonitoringRack MonitoringSystemSystem