Lindy Carbon Monoxide Alarm user manual Network Configuration, IP Address

4	OPERATION
	OPERATION
4.5	Network Configuration	The Ethernet interface makes it possible to integrate the RMS into a local
		network (10 Mbit Ethernet), thus making the following functions
		available:
		– SNMP support, thus integration into network management platforms
		– Log book functional capabilities (syslog service)
		– Loading and saving the system configuration (TFTP)
		– Updating the system (TFTP)
		• If the RMS is not operated in an Ethernet network, the settings descri-
		bed in this chapter can be ignored.
	Note	If you are unclear about the conditions of the local network, please ask
		your network administrator for assistance.
		Incorrect settings can have the effect that the device is isolated from the
		network and/or is no longer capable of sending messages to the desired
		destination addresses (see also > 4.5.1).
	Central input mask for settings	23
	for the Ethernet interface.
	References to sub-menus are
	marked with “>”.
1
		[I] IP ADDRESS
		IP address of the Ethernet interface.
		[N] NETMASK
		Netmask of the Ethernet interface.
		[B] BROADCAST
		Broadcast address of the Ethernet interface.
		[G] GATEWAY
		Gateway to adjacent networks of the local network, which may be required.
		[S] SNMP CONFIGURATION
		All SNMP-specific settings of the device (> 4.5.1).
		[L] LOG SERVICE
		System log settings (> 4.5.2).
		[?] HELP
		Explanation of the menu items..
		[Q] QUIT WITHOUT SAVING
		Jump back to the main menu without saving changes.
		[RETURN] QUIT WITH SAVING
		Jump back to the main menu and save changes.

MonitoringRack MonitoringSystemSystem