Home Safety Tips What You Can Do | Nighthawk KN-COEG-3 guide

Part Two – Carbon Monoxide and Gas

Home Safety Tips

What You Can Do...

•Buy only appliances approved by a nationally recognized testing laboratory.

•Choose fuel-burning appliances that can be vented to the outdoors, whenever possible.

•Make sure appliances are installed according to manufacturer’s instructions and local building codes. Most appliances should be installed by professionals and should be inspected by the proper authority after installation.

•Have the heating system, vents, chimney and flue inspected and cleaned by a qualified technician every year.

•Follow manufacturer’s directions for safe operation of all fuel-burning appliances.

•Examine vents and chimneys regularly for improper connections, visible rust or stains.

•Open a window when a fireplace or wood-burning stove is in use, and provide adequate outdoor air for furnace and water heater.

•Notice problems that could indicate improper appliance operation:

–Decreasing hot water supply

–Furnace unable to heat house or runs constantly

–Sooting, especially on appliances

–Unfamiliar or burning odor

–Yellow or orange flame

•Be aware of the symptoms of carbon monoxide poisoning:

–headaches, dizziness, weakness, sleepiness, nausea, vomiting, confusion and disorientation.

•Recognize that CO poisoning may be the cause when family members suffer from flu-like symptoms that don’t disappear but improve when they leave home for extended periods of time.

What You Should Not Do...

•Never burn charcoal inside a home, garage, cabin, RV or camper.

•Never install, service, or convert fuel-burning appliances from one type to another without proper knowledge, skills and tools.

•Never use a Gas range, oven, or clothes dryer for heating.

•Never operate unvented Gas-burning appliances, such as kerosene or natural Gas space heaters, in a closed room.

•Never operate Gasoline-powered engines (like vehicles, motorcycles, lawn mowers, yard equipment or power tools) in confined areas such as garages or basements, even if an outside door or window is open.

•Never ignore a safety device when it shuts off an appliance.

•Never ignore a CO alarm or Gas alarm.

Be Aware of the Warning Signs of Carbon

Monoxide: Clues You Can See...

•Streaks of carbon or soot around the service door of your fuel-burning appliances.

•A yellow or orange flame may indicate a problem with natural Gas appliances.

•Excessive rusting on flue pipes or appliance jackets.

•Loose or missing furnace panel.

•Moisture collecting on the windows and walls of furnace rooms.

•Loose or disconnected vent/chimney, fireplace or appliance.

•Small amounts of water leaking from the base of the chimney, vent or flue pipe.

•Rust on the portion of the vent pipe visible from outside your home.

•The absence of a draft in your chimney (indicating blockage).

•Fallen soot from the fireplace chimney.

•Loose, damaged or discolored bricks on your chimney.

Clues You Cannot See...

•Internal appliance damage or malfunctioning components

•Improper burner adjustment

•Hidden blockage or damage in chimneys

2-2

KN-COEG-3 specifications

The Nighthawk KN-COEG-3 is a state-of-the-art carbon monoxide and explosive gas detector designed to offer paramount safety for homes and workplaces. With its sleek design and advanced technology, this device stands out in the market for its reliability and ease of use. One of the most striking features of the KN-COEG-3 is its dual-function capability, allowing it to detect both carbon monoxide (CO) emitted from sources like gas appliances and vehicles and explosive gases such as natural gas and propane. This dual detection provides an added layer of safety, ensuring that you are alerted to potential dangers in real time.

The device is equipped with a highly sensitive electrochemical sensor for carbon monoxide detection, which offers precise readings and minimizes false alarms. The explosive gas sensor utilizes a catalytic bead technology, which allows for quick identification of dangerous gas leaks. Together, these technologies ensure that you are protected from two of the most serious gas-related hazards.

Another key feature of the Nighthawk KN-COEG-3 is its user-friendly interface. The device includes a well-designed LCD display that provides clear, easy-to-read information regarding the levels of carbon monoxide and explosive gases detected in the air. It also features a loud alarm system that activates immediately upon detection of dangerous levels, ensuring that occupants can promptly respond to evacuation protocols.

The KN-COEG-3 boasts a compact and stylish design, making it easy to install in various locations, whether mounted on a wall or placed on a countertop. It is powered by an AC adapter with a battery backup, which guarantees continuous operation even in the event of a power outage. This reliability ensures peace of mind for users, whether they are at home or away.

Additionally, the device incorporates advanced self-test features that allow it to periodically check its sensor and system functionality, assuring users of its operational integrity. By coupling advanced technology with a commitment to user safety, the Nighthawk KN-COEG-3 presents a compelling solution for anyone looking to enhance their safety against carbon monoxide and explosive gas hazards in their environment.