Nighthawk KN-COEG-3 manual Carbon Monoxide and Explosive Gas Alarm

Page 1

By KIDDE Safety

AC Powered with Battery Backup

Carbon Monoxide and Explosive Gas Alarm

User’s Guide

4-1 and 4-2 for

 

See pages

 

“What to do When the

 

Alarm Sounds”

SINGLE STATION

 

CARBON MONOXIDE ALARM

 

NIGHTHAWK

Carbon

Explosive

Gas

Monoxide

Alarm

Alarm

 

RESIDENTIAL

GAS DETECTOR

Nighthawk CO and Gas Alarm with Digital Display, Peak Level Memory and 9V Battery Backup

Model: KN-COEG-3

For questions concerning your Carbon Monoxide and Explosive Gas Alarm, please call our Consumer Hotline at 1-800-880-6788.

Includes 9V Battery

Please have the following information

ready when calling:

CO and Gas Alarm Model number (located on back of alarm):

CO and Gas Alarm Assembly number (located on back of alarm):

Date of Manufacture (located on the back of the alarm):

Date of Purchase:

Where Purchased:

810-1571 REV. C 03/01

Image 1
Contents Carbon Monoxide and Explosive Gas Alarm Table of Contents Introduction About this User’s GuideQuick Set-Up Guide Setting up your CO and Gas alarm for first time operationAbout Your CO and Gas Alarm Part One Your Nighthawk CO and Gas AlarmDigital Display Nighthawk’s Unique FeaturesWhere Not to Install Your CO and Gas Alarm Where to Install Your CO and Gas AlarmDirect Plug Alarm How to Install Your AlarmTo install To rotate adapterNormal Operating Characteristics Wall Mounted AlarmTable Top Alarm Testing the Electronics How to Test Your AlarmTesting the sensor response Malfunction Signal Group 1 Component Failure If the alarm malfunctionsLow Battery Warning Malfunction Signal Group 2 Microprocessor FailureHow to Care for Your Alarm How to Know If Your Alarm is MalfunctioningTo Reset the Peak Level Memory… Peak Level Memory ButtonPart Two Carbon Monoxide and Gas What You Should Not Do Home Safety Tips What You Can DoClues You Cannot See Mid Levels Part Three What You Should Know Before the Alarm SoundsHigh Levels Common Medium Exposure Symptoms Common Mild Exposure SymptomsCommon Extreme Exposure Symptoms What to do if the Alarm Sounds for Gas Part Four What to Do if the Alarm Sounds for GasDo not activate any electrical switch or telephone Treatment for CO PoisoningPart Five Technical Information What happens if the power goes out? Part Six Frequently Asked QuestionsPart Six Frequently Asked Questions Part Six Display Reading and What They Mean Display Shows Alarm Sound Unit StatusDisplay Shows Alarm Sound Unit Status Recommended Action Readings You May See When Unit is AC PoweredPage Wall Mount Diagram Warranty Registration Limited WarrantyPlease send products and all other correspondence to

KN-COEG-3 specifications

The Nighthawk KN-COEG-3 is a state-of-the-art carbon monoxide and explosive gas detector designed to offer paramount safety for homes and workplaces. With its sleek design and advanced technology, this device stands out in the market for its reliability and ease of use. One of the most striking features of the KN-COEG-3 is its dual-function capability, allowing it to detect both carbon monoxide (CO) emitted from sources like gas appliances and vehicles and explosive gases such as natural gas and propane. This dual detection provides an added layer of safety, ensuring that you are alerted to potential dangers in real time.

The device is equipped with a highly sensitive electrochemical sensor for carbon monoxide detection, which offers precise readings and minimizes false alarms. The explosive gas sensor utilizes a catalytic bead technology, which allows for quick identification of dangerous gas leaks. Together, these technologies ensure that you are protected from two of the most serious gas-related hazards.

Another key feature of the Nighthawk KN-COEG-3 is its user-friendly interface. The device includes a well-designed LCD display that provides clear, easy-to-read information regarding the levels of carbon monoxide and explosive gases detected in the air. It also features a loud alarm system that activates immediately upon detection of dangerous levels, ensuring that occupants can promptly respond to evacuation protocols.

The KN-COEG-3 boasts a compact and stylish design, making it easy to install in various locations, whether mounted on a wall or placed on a countertop. It is powered by an AC adapter with a battery backup, which guarantees continuous operation even in the event of a power outage. This reliability ensures peace of mind for users, whether they are at home or away.

Additionally, the device incorporates advanced self-test features that allow it to periodically check its sensor and system functionality, assuring users of its operational integrity. By coupling advanced technology with a commitment to user safety, the Nighthawk KN-COEG-3 presents a compelling solution for anyone looking to enhance their safety against carbon monoxide and explosive gas hazards in their environment.