Nighthawk KN-COEG-3 manual Readings You May See When Unit is AC Powered

Page 22

Part Six – Display Reading and What They Mean

Readings You May See When Unit is AC Powered

Display Shows

Alarm Sound

Unit Status

Recommended Action

Steady “Err”

“Chirp” every

Unit malfunctioning when

Call KIDDE Safety customer

and flashing dot

30 seconds

AC powered

service at 1-800-880-6788

 

 

 

 

Readings You May See When Unit is on Temporary Battery Backup

Display Shows

Alarm Sound

Unit Status

Recommended Action

Flashing dot

None

Normal battery-only operation –

 

 

unit will show reading only if it

 

 

senses CO or gas

Plug in to AC as soon as possible to conserve battery

Steady “Err”

“Chirp” every

Unit malfunctioning when

Call KIDDE Safety customer

and flashing dot

30 seconds

battery powered

service at 1-800-880-6788

 

 

 

 

 

Flashing dot

“Chirp” every

Very low battery –

Replace battery

 

30 seconds

unit will not respond to CO

Refer to Step 3 on page ii.

 

 

or gas

 

 

 

 

 

 

 

No display

Constant Alarm

Near dead battery or

Replace battery –

 

 

unit malfunction

If this does not fix condition,

 

 

 

Call KIDDE Safety customer

 

 

 

service at 1-800-880-6788

 

 

 

 

 

If at any time you test the alarm and it does not perform as described, have it replaced immediately.

6-4

Image 22
Contents Carbon Monoxide and Explosive Gas Alarm Table of Contents About this User’s Guide IntroductionSetting up your CO and Gas alarm for first time operation Quick Set-Up GuidePart One Your Nighthawk CO and Gas Alarm About Your CO and Gas AlarmNighthawk’s Unique Features Digital DisplayWhere to Install Your CO and Gas Alarm Where Not to Install Your CO and Gas AlarmTo install How to Install Your AlarmDirect Plug Alarm To rotate adapterNormal Operating Characteristics Wall Mounted AlarmTable Top Alarm Testing the Electronics How to Test Your AlarmTesting the sensor response Low Battery Warning If the alarm malfunctionsMalfunction Signal Group 1 Component Failure Malfunction Signal Group 2 Microprocessor FailureTo Reset the Peak Level Memory… How to Know If Your Alarm is MalfunctioningHow to Care for Your Alarm Peak Level Memory ButtonPart Two Carbon Monoxide and Gas What You Should Not Do Home Safety Tips What You Can DoClues You Cannot See Mid Levels Part Three What You Should Know Before the Alarm SoundsHigh Levels Common Medium Exposure Symptoms Common Mild Exposure SymptomsCommon Extreme Exposure Symptoms Do not activate any electrical switch or telephone Part Four What to Do if the Alarm Sounds for GasWhat to do if the Alarm Sounds for Gas Treatment for CO PoisoningPart Five Technical Information Part Six Frequently Asked Questions What happens if the power goes out?Part Six Frequently Asked Questions Display Shows Alarm Sound Unit Status Part Six Display Reading and What They MeanReadings You May See When Unit is AC Powered Display Shows Alarm Sound Unit Status Recommended ActionPage Wall Mount Diagram Warranty Registration Limited WarrantyPlease send products and all other correspondence to

KN-COEG-3 specifications

The Nighthawk KN-COEG-3 is a state-of-the-art carbon monoxide and explosive gas detector designed to offer paramount safety for homes and workplaces. With its sleek design and advanced technology, this device stands out in the market for its reliability and ease of use. One of the most striking features of the KN-COEG-3 is its dual-function capability, allowing it to detect both carbon monoxide (CO) emitted from sources like gas appliances and vehicles and explosive gases such as natural gas and propane. This dual detection provides an added layer of safety, ensuring that you are alerted to potential dangers in real time.

The device is equipped with a highly sensitive electrochemical sensor for carbon monoxide detection, which offers precise readings and minimizes false alarms. The explosive gas sensor utilizes a catalytic bead technology, which allows for quick identification of dangerous gas leaks. Together, these technologies ensure that you are protected from two of the most serious gas-related hazards.

Another key feature of the Nighthawk KN-COEG-3 is its user-friendly interface. The device includes a well-designed LCD display that provides clear, easy-to-read information regarding the levels of carbon monoxide and explosive gases detected in the air. It also features a loud alarm system that activates immediately upon detection of dangerous levels, ensuring that occupants can promptly respond to evacuation protocols.

The KN-COEG-3 boasts a compact and stylish design, making it easy to install in various locations, whether mounted on a wall or placed on a countertop. It is powered by an AC adapter with a battery backup, which guarantees continuous operation even in the event of a power outage. This reliability ensures peace of mind for users, whether they are at home or away.

Additionally, the device incorporates advanced self-test features that allow it to periodically check its sensor and system functionality, assuring users of its operational integrity. By coupling advanced technology with a commitment to user safety, the Nighthawk KN-COEG-3 presents a compelling solution for anyone looking to enhance their safety against carbon monoxide and explosive gas hazards in their environment.