Heat Controller BHD-501-G, BHD-651-G Troubleshooting Guide, Room Airconditioner Voltage Limits

Page 12

BHD-G Service Manual

Portable Dehumidifier with R-410A

Heat Controller, Inc.

 

 

 

6. TROUBLESHOOTING GUIDE

6.1 TROUBLESHOOTING GUIDE

In general, possible trouble is classified in three kinds. One is called Starting Failure which is caused from an electri- cal defect, another is ineffective Air Conditioning caused by a defect in the refrigeration circuit and improper applica- tion, and the other is called the Structure Damage.

ROOM AIRCONDITIONER VOLTAGE LIMITS:

NAMEPLATE RATING

MINIMUM

MAXIMUM

 

 

 

115V

103V

127V

 

 

 

6.2 IDENTIFY ALL POSSIBLE PCB FAULT CODES

P1: Anti icing protection. When the protection is activated, the compressor will be off while the fan motor is on with high speed, and the Turbo indicator will be on with the LED displaying P1. After the Anti-icing function is completed, the unit will restore operation in the previous mode.

P2: Water full protection. When the water tank is full , the compressor and fan motor will shut down and the water full indicator will flash with LED displaying P2. Under this situation, all buttons are deactivated. After the water is removed, the unit will restore operating at the previous setting.

E1: Humidity sensor failure. When the output voltage of sensor is lower than 0.5V or higher than 4.95V, the unit will alarm and the LED displays E1. After the defect is cleared, the unit will not work until the power to the unit is re-stored. E2: Temperature sensor failure. When the output voltage of sensor is lower than 0.5V or higher than 4.95V, the unit will alarm and the LED displays E2. After the defect is cleared, the unit will not work until the power to the unit is re-stored.

6.3TROUBLE SHOOTING

6.3.1Water level protection function abnormal

Abnormal water level protection function includes the following: (1) There is an alarm when the water level is normal and (2) There is no alarm for full water.

6.3.2 Automatic trouble alarm

When the line temperature sensor is defective, the motors of the compressor and the fan will shut down, and the power indicator will flash at 5 Hz.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Portable Dehumidifer Series With R-410A Table of Contents Safety Precautions Unit FeaturesInsulation Resistance Test Control LocationsTimer Outside DimensionsTimer Set Control Operating Conditions Turning the Unit on or OFFOperation with Water Tank Maintenance Operation with Continuous DrainagePowering on the Unit Setting the Relative HumidityContinuous Dehumidification Mode Powering OFF the UnitDefective Compressor Compressor Winding TestGround Test Checking Compressor EfficiencyHermetic Component Replacement Sealed Refrigeration System RepairsChecking the Internal Overload Equipment RequiredFAN Motor CapacitorCapacitor Test Troubleshooting Guide Identify ALL Possible PCB Fault CodesTrouble Shooting Room Airconditioner Voltage LimitsHumidity sensor check Fail to start or fail to start motor Abnormal noise Complaint Cause RemedyPortable Dehumidifier with R-410A Complaint Cause Remedy Wiring Diagram 05/2010

BHD-301-G, BHD-651-G, BHD-501-G specifications

The Heat Controller BHD series, comprising models BHD-651-G, BHD-301-G, and BHD-501-G, is designed to meet diverse heating needs with efficiency and reliability. Each model incorporates advanced features and technologies that enhance user experience, making them ideal for both home and commercial use.

Starting with the BHD-651-G, this model is a powerhouse, offering significantly higher output capacity suitable for larger spaces. It boasts an intelligent thermostat that ensures precise temperature control, allowing users to maintain their preferred environment effortlessly. The BHD-651-G employs a dual heating technology, combining convection and radiant heat for balanced warmth. Additionally, its energy-saving mode optimizes power consumption without sacrificing comfort, making it an eco-friendly choice.

The BHD-301-G is designed for medium-sized areas, striking a perfect balance between power and portability. Featuring a sleek design, it is lightweight and easy to move around. One of its standout features is the programmable timer, allowing users to set heating schedules that align with their lifestyles. This model also includes a filter system that cleans and purifies the air while heating, ensuring a healthier indoor environment. Moreover, the BHD-301-G operates quietly, making it ideal for use in bedrooms or offices.

Finally, the BHD-501-G caters to a variety of settings where flexibility is crucial. This model is equipped with multi-directional airflow, enabling users to direct heat where it is most needed. The BHD-501-G also features an advanced safety system, including overheat protection and a tip-over switch, ensuring peace of mind during use. Its user-friendly interface with intuitive controls simplifies operation, allowing for effortless adjustments to temperature and settings.

In summary, the Heat Controller BHD series offers a comprehensive range of features designed to provide efficient heating solutions tailored to different environments. With technologies aimed at enhancing power efficiency, air quality, and user comfort, the BHD-651-G, BHD-301-G, and BHD-501-G models stand out as top choices for reliable heat management. Their innovative characteristics ensure that users can enjoy warmth and comfort in any setting while being mindful of energy consumption and safety.
Top Page Image Contents