Heat Controller BHD-651-G, BHD-501-G, BHD-301-G Outside Dimensions, Timer Set Control

Page 4

BHD-G Service Manual

Portable Dehumidifier with R-410A

Heat Controller, Inc.

 

 

 

3.Humidity Set Control

The humidity level can be set within a range of 35%RH (Relative Humidity) to 85%RH (Relative Humidity) in 5% increments.

For drier air, press the button and set to a lower percent value(%). When the value displays 35%,press

the button again will activate the continuous dehumidifying operation. For damper air, press the button and set a higher percent value(%).

TIMER Set Control

Use the (+) or (-) buttons to set the Auto start and Auto stop time from 0.0 to 24 hours.

4. Fan speed

Control the fan speed. By pressing either High or Normal fan speed. Set the fan control to High for maximum mois- ture removal. When the humidity has been reduced and quieter operation is preferred, set the fan control to Normal.

5. TIMER

Press to initiate the Auto start and Auto stop feature, in conjuction with the and keys.

6. Display

Shows the set % humidity level from 35% to 85% or auto start/stop time (0~24 hours) while setting, then shows the actual (+5% accuracy) room % humidity level in a range of 30%RH (Relative Humidity) to 90%RH(Relative humidity).

Error Codes:

AS- Humidity sensor error--Unplug the unit and plug it back in. If error repeats, call for service. ES- Temperature sensor error-- Unplug the unit and plug it back in. If error repeats, call for service.

P1- Unit is defrosting-- Allow the unit time to automatically defrost. The error will clear after the unit self defrosts. P2- Bucket is full-- Empty the bucket and replace in the right position.

CO- Continuous dehumidifying mode is selected.

1.5 OUTSIDE DIMENSIONS

Model

Width

Height

Depth

in. (mm)

in. (mm)

in. (mm)

 

BHD-301-G

13.28” (340)

19.88” (505)

9.96” (253)

 

 

 

 

BHD-501-G

15.47” (393)

24.49” (622)

12.64” (321)

BHD-651-G

 

 

 

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Portable Dehumidifer Series With R-410A Table of Contents Safety Precautions Unit FeaturesInsulation Resistance Test Control LocationsOutside Dimensions TimerTimer Set Control Turning the Unit on or OFF Operating ConditionsOperation with Water Tank Maintenance Operation with Continuous DrainagePowering on the Unit Setting the Relative HumidityContinuous Dehumidification Mode Powering OFF the UnitDefective Compressor Compressor Winding TestGround Test Checking Compressor EfficiencyHermetic Component Replacement Sealed Refrigeration System RepairsChecking the Internal Overload Equipment RequiredFAN Motor CapacitorCapacitor Test Troubleshooting Guide Identify ALL Possible PCB Fault CodesTrouble Shooting Room Airconditioner Voltage LimitsHumidity sensor check Fail to start or fail to start motor Abnormal noise Complaint Cause RemedyPortable Dehumidifier with R-410A Complaint Cause Remedy Wiring Diagram 05/2010

BHD-301-G, BHD-651-G, BHD-501-G specifications

The Heat Controller BHD series, comprising models BHD-651-G, BHD-301-G, and BHD-501-G, is designed to meet diverse heating needs with efficiency and reliability. Each model incorporates advanced features and technologies that enhance user experience, making them ideal for both home and commercial use.

Starting with the BHD-651-G, this model is a powerhouse, offering significantly higher output capacity suitable for larger spaces. It boasts an intelligent thermostat that ensures precise temperature control, allowing users to maintain their preferred environment effortlessly. The BHD-651-G employs a dual heating technology, combining convection and radiant heat for balanced warmth. Additionally, its energy-saving mode optimizes power consumption without sacrificing comfort, making it an eco-friendly choice.

The BHD-301-G is designed for medium-sized areas, striking a perfect balance between power and portability. Featuring a sleek design, it is lightweight and easy to move around. One of its standout features is the programmable timer, allowing users to set heating schedules that align with their lifestyles. This model also includes a filter system that cleans and purifies the air while heating, ensuring a healthier indoor environment. Moreover, the BHD-301-G operates quietly, making it ideal for use in bedrooms or offices.

Finally, the BHD-501-G caters to a variety of settings where flexibility is crucial. This model is equipped with multi-directional airflow, enabling users to direct heat where it is most needed. The BHD-501-G also features an advanced safety system, including overheat protection and a tip-over switch, ensuring peace of mind during use. Its user-friendly interface with intuitive controls simplifies operation, allowing for effortless adjustments to temperature and settings.

In summary, the Heat Controller BHD series offers a comprehensive range of features designed to provide efficient heating solutions tailored to different environments. With technologies aimed at enhancing power efficiency, air quality, and user comfort, the BHD-651-G, BHD-301-G, and BHD-501-G models stand out as top choices for reliable heat management. Their innovative characteristics ensure that users can enjoy warmth and comfort in any setting while being mindful of energy consumption and safety.
Top Page Image Contents