Remote Control Operating Instructions | Danby DPAC10030 instruction

Remote Control Operating

Instructions

1.Sending Signal: The remote control must be aimed directly at the infra-red eye located below control panel when initiating a command. When the remote control is switched on and a button is pressed, a beep will sound (main unit) confirming a signal was sent/received. All program selections appearing in the remote control display will appear in the display of the main unit when both units are operational. If the main unit does not respond to the command issued, try the procedure again.

If the main unit again fails to respond;

Check the following:

•Are the receiver and the remote unit within the required 7 meter (23 ft.) operating distance?

•Is the receiver window on the main unit partially blocked and/or obscured?

•Are the batteries correctly installed inside the remote (positive+ / negative-)?

•Check the batteries. If low, replace.

2.Setting/Adjusting Time of Day Clock (Remote Control): When the batteries are first installed, the clock display flashes “0:00”. Press the MIN button to set the correct (minute) time. Each time the MIN button is pressed the time is increased in 10 minute increments. The time sets automatically (stops flashing) after 5 seconds. Press/hold the HOUR button to select/change the correct hour time. (time flashes) Each time the HOUR button is pressed the time will increase in 1 hour increments. The time automatically sets (stops flashing) after 5 seconds. When the main unit is swithed on using the remote control, the time on the main unit will automatically adjust to the time set on the remote control.

3.Mode Setting: Press the “Mode” button to select operating mode. Each time the button is pressed will advance to a different setting (Auto–Cool–Dry–Fan).

4. Temperature Setting: Press the remote

+	buttons to select the desired
C/F	operating temperature.
-	Each time a button is
	pressed the temperature will

increase/decrease 1°C/F. The temperature selected will appear in the remote display. When the main unit is swithed on using the remote control, the temperature on the main unit will automatically adjust to the temperature set on the remote control. Temperature ranges from 16˚C-31˚C (60.8F ~ 88F)

5.Fan Speed Setting: Press the “Fan” button to select the operating fan speed. Depending on the mode selection, the fan button will advance to a different fan speed (Auto–Low–Medium –High) The fan speed selected will appear in the display window. i.e.

MODE	FAN SPEEDS
Cool	Low–Medium–High
Dry	Low
Fan	Low-Medium-High
AUTO	Low–Medium–High

	LCD Window
	3	5
	3	4
	6	8
	6	Timer On/Off
	2	Timer On/Off
	2

DPAC10030 specifications

The Danby DPAC10030 is a powerful portable air conditioner designed for residential and small office environments, providing cooling relief during the hot summer months. With its sleek design and robust features, the DPAC10030 ensures comfort while offering efficient performance.

At the heart of the Danby DPAC10030 is its cooling capacity of 10,000 BTU, making it suitable for spaces up to 300 square feet. This ability allows it to cool down a room rapidly, providing immediate relief from heat. The unit operates quietly, which is ideal for bedrooms or study areas, ensuring that users can enjoy a peaceful environment without disruptive noise.

One of the standout features of the DPAC10030 is its innovative dual-hose system, which enhances its cooling efficiency. Unlike traditional single-hose models that draw in air from the room and vent it outside, the dual-hose design allows for one hose to pull the hot air out while the other brings in fresh air from outside. This not only cools the space more effectively but also helps maintain a more balanced indoor environment.

The Danby DPAC10030 comes equipped with user-friendly electronic controls, including an LED display that makes it easy to set your desired temperature and operating mode. It offers multiple fan speeds and cooling settings, allowing users to customize the environment to their preferences. Additionally, the unit features a 24-hour programmable timer, which enables users to control when the air conditioner turns on and off, conserving energy while ensuring comfort.

For those who prioritize energy efficiency, the DPAC10030 offers a commendable Energy Efficiency Ratio (EER). Lower energy consumption translates to reduced electricity bills, making it an economically viable choice for cooling needs. The unit also includes a programmable thermostat that maintains your desired temperature with minimal effort.

In terms of mobility, the Danby DPAC10030 features built-in casters, allowing for easy movement from room to room, as well as side handles for convenience. The compact design ensures that it can fit through doorways without hassle.

Moreover, maintenance is straightforward with an easy-to-clean washable filter that helps trap dust and allergens, improving indoor air quality.

In summary, the Danby DPAC10030 is a versatile and efficient portable air conditioner that combines convenience and performance. Whether for home use or in a small office, its powerful cooling capabilities, user-friendly features, and energy-efficient technology make it an excellent choice for those seeking reliable relief from the heat.