Infinity L30, M30 manual Operation, Program and Operate ONE Stage Program Figure

Page 10

OPERATION

PROGRAM AND OPERATE - ONE STAGE PROGRAM (Figure 1)

1.

Turn the power switch on.

 

2.

Press PROGRAM NUMBER. Use

to display the desired program number (P1 - P30).

3.

Press ENTER / REVIEW to select the displayed PROGRAM NUMBER. STAGE 1 and NIGHT TIME

 

(DELAYED START) lights turn on. Enter

to set the time required for the program to be completed and

 

ready to cast (1 - 99hrs).

 

4.

Press ENTER / REVIEW. STAGE 1 light remains on, NIGHT TIME (DELAY START) light turns off and

 

HEAT RATE light turns on. Enter

to select the heat rate required from 1°F - 30°F / min

 

(1oC - 17oC / min) or "FULL" for the maximum heat rate.

5.

Press ENTER / REVIEW. STAGE 1 light remains on, HEAT RATE light turns off and TEMP light turns on.

 

Enter

to select the temperature required up to the maximum of 2012°F (1100°C).

6.

Press ENTER / REVIEW. STAGE 1 light remains on, TEMP light turns off and HOLD TIME light turns on.

 

Enter

to program the time needed to hold at above temperature. (0 - 4hrs).

7.For one stage, the furnace must be programmed not to use STAGE 2, 3 or 4. Follow these steps:

A.After completing step 6, press ENTER / REVIEW. STAGE 1 light turns off, STAGE 2 and HEAT RATE lights turn on.

B. Press Main Display shows ".....5, 4, 3, 2, 1,

COOL, NO." Select "NO" to

program the furnace not to use STAGE 2, 3 or

4.

8.All necessary information for this program is now entered.

9.To run the program immediately, press START / STOP.

10.To delay the start of the program to be ready to cast at the pre-set time (see Step 3), press NIGHT TIME (DELAY START).

NOTE : If NIGHT TIME (DELAY START) is pressed while a program is running, the time remaining for completion of the program will appear on the Main Display for 5 seconds.

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents F i n i t y TM Table of Contents Do Not Attempt Internal Service WarrantySafety Instructions IntroductionInfinity M Infinity L SpecificationsInfinity M and L Display KEY Parts Identification and ExplanationFront Panel Figure DescriptionInfinity M and L Identification Display Description Lower Back Panel FigureInfinity Lower Back Panel Unpack and SET-UP InstallationVenting Instructions To Turn the Beep on and OFF Figure Operation Program and Operate ONE Stage Program FigureProgram and Operate TWO Stage Program Figure Program and Operate Three Stage Program Figure Program and Operate Four Stage Program Figure Review a Program Figure Edit While a Program is Running Figure While the program is runningHold Time Sample ONE Stage ProgramNight Time Heat Rate StageSample Three Stage Program Program with Cooling Error Codes Error Description Probable Cause CodeError Codes Temperature Calibration ServiceCleaning Instructions Temperature Calibration with Calibration Tablets FigurePower Failure Replacement of Door Insulation and SpringsField Service Replacement of Heating PlatesInfinity with Upper Rear Panel Removed Infinity MReplacement of the Main PC Board 115VPage Replacement of the Thermocouple Assembly PN Replacement of the Triac PN Spare Parts List Parts for Infinity M DescriptionParts for Infinity L Description Program # Metals Program Card FormsHeat Temp Hold Rate Time Stage Program Card Forms Toll Free 1-800-JELRUS-1

M30, L30 specifications

The Infinity L30 and M30 are two notable offerings from Infinity, a company renowned for its commitment to high-quality audio technology and innovative designs. These speakers are designed to cater to audiophiles and enthusiasts alike, providing an immersive listening experience.

The Infinity L30 is a floor-standing speaker that emphasizes powerful sound and a stylish form factor. One of its key features is the incorporation of Infinity’s proprietary EMIT (Electromagnetic Induction Tweeter) technology. This technology is known for delivering exceptionally clear high frequencies, allowing listeners to experience the finer details in their music. The L30 also features a robust bass reflex design, which enhances low-frequency response, resulting in a richer sound experience. The speaker's design typically includes a high-quality, wooden cabinet that helps to minimize unwanted vibrations while adding an aesthetic appeal to any room.

On the other hand, the Infinity M30 is a bookshelf speaker designed for more compact environments without compromising sound quality. It shares several technologies with the L30, including the EMIT tweeter, ensuring that high-frequency reproduction remains clear and detailed. The M30's design also includes a rear-firing bass port, which helps to improve the bass response, making it suitable for a variety of setups, whether they are part of a home theater system or a dedicated stereo setup. The speaker is designed for versatility, easily fitting into various decor styles while delivering impressive sound quality.

Both speakers benefit from Infinity’s meticulous engineering, ensuring that they provide an exceptional audio experience. Features such as high-efficiency drivers, a wide frequency range, and the inclusion of durable materials contribute to their performance and longevity. Users can expect these speakers to produce sound with great accuracy and depth, making them ideal for genres ranging from classical to modern pop.

In summary, the Infinity L30 and M30 are exemplary models that showcase Infinity’s dedication to producing high-performance audio solutions. With advanced technologies, such as the EMIT tweeters, and thought-out designs aimed at maximizing sound quality, both models make powerful additions to any audio setup, promising to elevate the listening experience for users. Whether for music or movies, the L30 and M30 are sure to impress with their sonic capabilities and visual appeal.
Top Page Image Contents