Infinity M30, L30 manual Program and Operate TWO Stage Program Figure

Page 11

OPERATION

PROGRAM AND OPERATE - TWO STAGE PROGRAM (Figure 1)

1.Follow One Stage Program, Steps 1 - 6.

2.Press ENTER / REVIEW. STAGE 1 light turns off, STAGE 2 and HEAT RATE lights turn on. Main Display shows four heat rate choices. Choose one:

A. Select heat rate between 1°F - 30°F / min (1°C - 17°C / min) using

.

B. Select "FULL" to program maximum heat rate.

 

C. Select "COOL" to program the furnace to cool to a selected temperature.

 

D. Select "NO" to turn of STAGE 2, 3 and 4. This will result in a One Stage Program.

NOTE: The HEAT RATE cannot be programmed to "COOL" in STAGE 1 - only in STAGE 2, 3 or 4.

3. Press ENTER / REVIEW. HEAT RATE light turns off and TEMP light turns on. Enter

for the

temperature required: heating temperature up to a maximum of 2012°F (1100°C) or cooling

temperature down to a minimum of 100°F (38°C).

 

4. Press ENTER / REVIEW. TEMP light turns off and HOLD TIME light turns on. Enter

to program the

time needed to hold at the above temperature (0 - 4hrs.).

 

5.For two stages, the furnace must be programmed not to use STAGE 3 or 4. Follow these steps:

A.After completing Step 4, press ENTER / REVIEW. STAGE 2 light turns off, STAGE 3 and HEAT RATE lights turn on.

B. Press Main Display shows “....5,4,3,2,1, COOL, NO.” Select “NO” to program the

furnace not to use STAGE 3 or 4.

6.All necessary information for this program is now entered.

7.To run the program immediately, press START / STOP.

8.To delay the start of the program to be ready to cast at the pre-set time (see One Stage Program, Step 3), press NIGHT TIME (DELAY START).

NOTE: If NIGHT TIME (DELAY START) is pressed while a program is running, the time remaining for completion of the program will appear on the Main Display for 5 seconds.

10

Image 11
Contents F i n i t y TM Table of Contents Introduction WarrantySafety Instructions Do Not Attempt Internal ServiceInfinity M and L SpecificationsInfinity M Infinity L Description KEY Parts Identification and ExplanationFront Panel Figure DisplayInfinity M and L Identification Infinity Lower Back Panel Lower Back Panel FigureDisplay Description Venting Instructions InstallationUnpack and SET-UP To Turn the Beep on and OFF Figure Program and Operate ONE Stage Program Figure OperationProgram and Operate TWO Stage Program Figure Program and Operate Three Stage Program Figure Program and Operate Four Stage Program Figure Review a Program Figure While the program is running Edit While a Program is Running FigureStage Sample ONE Stage ProgramNight Time Heat Rate Hold TimeSample Three Stage Program Program with Cooling Error Description Probable Cause Code Error CodesError Codes Temperature Calibration with Calibration Tablets Figure ServiceCleaning Instructions Temperature CalibrationReplacement of Door Insulation and Springs Power FailureReplacement of Heating Plates Field ServiceInfinity M Infinity with Upper Rear Panel Removed115V Replacement of the Main PC BoardPage Replacement of the Thermocouple Assembly PN Replacement of the Triac PN Parts for Infinity M Description Spare Parts ListParts for Infinity L Description Heat Temp Hold Rate Time Stage Program Card FormsProgram # Metals Program Card Forms Toll Free 1-800-JELRUS-1

M30, L30 specifications

The Infinity L30 and M30 are two notable offerings from Infinity, a company renowned for its commitment to high-quality audio technology and innovative designs. These speakers are designed to cater to audiophiles and enthusiasts alike, providing an immersive listening experience.

The Infinity L30 is a floor-standing speaker that emphasizes powerful sound and a stylish form factor. One of its key features is the incorporation of Infinity’s proprietary EMIT (Electromagnetic Induction Tweeter) technology. This technology is known for delivering exceptionally clear high frequencies, allowing listeners to experience the finer details in their music. The L30 also features a robust bass reflex design, which enhances low-frequency response, resulting in a richer sound experience. The speaker's design typically includes a high-quality, wooden cabinet that helps to minimize unwanted vibrations while adding an aesthetic appeal to any room.

On the other hand, the Infinity M30 is a bookshelf speaker designed for more compact environments without compromising sound quality. It shares several technologies with the L30, including the EMIT tweeter, ensuring that high-frequency reproduction remains clear and detailed. The M30's design also includes a rear-firing bass port, which helps to improve the bass response, making it suitable for a variety of setups, whether they are part of a home theater system or a dedicated stereo setup. The speaker is designed for versatility, easily fitting into various decor styles while delivering impressive sound quality.

Both speakers benefit from Infinity’s meticulous engineering, ensuring that they provide an exceptional audio experience. Features such as high-efficiency drivers, a wide frequency range, and the inclusion of durable materials contribute to their performance and longevity. Users can expect these speakers to produce sound with great accuracy and depth, making them ideal for genres ranging from classical to modern pop.

In summary, the Infinity L30 and M30 are exemplary models that showcase Infinity’s dedication to producing high-performance audio solutions. With advanced technologies, such as the EMIT tweeters, and thought-out designs aimed at maximizing sound quality, both models make powerful additions to any audio setup, promising to elevate the listening experience for users. Whether for music or movies, the L30 and M30 are sure to impress with their sonic capabilities and visual appeal.