Infinity L30, M30 manual Error Codes, Error Description Probable Cause Code

Page 18

ERROR CODES

NOTE: “Beeps” occur when the Error Code appears on the Main Display

ERROR

DESCRIPTION

PROBABLE CAUSE

CODE

 

 

 

 

 

Er 1

INVALID ENTRY

Occurs when the HEAT RATE is set to COOL but the TEMP of that stage is

ERROR: STAGE,

 

 

HEAT RATE and

higher than the TEMP of the prior stage (should be heating). This will occur

 

TEMP lights flash

when a program is already running and a parameter was edited in process.

 

 

 

Er 2

TABLET

Occurs when the temperature on the display is outside the allowable range

 

TEMPERATURE

at the time the user pressed the ENTER / REVIEW keys simultaneously to set

 

CALIBRATION

 

the Infinity calibration temperature to 1500°F. If this occurs and is not an

 

ERROR

 

operator error, it indicates that there is a problem with the thermocouple or

 

 

 

 

the PC board. Press ENTER / REVIEW to turn off the error indication and

 

 

continue with the program. Press START / STOP to end the program.

 

 

 

Er 3

ELECTRONICS

Occurs when PC board hardware malfunctions.

 

MALFUNCTION

 

 

 

 

 

Er 4

OPEN

Occurs if the thermocouple is open or the connecting wire(s) are broken or

 

THERMOCOUPLE

disconnected from the terminal board.

 

 

 

Er 5

REVERSED

Occurs if the thermocouple extension wires have been connected backwards

 

THERMOCOUPLE

to the terminals on the printed circuit board. The error will be detected 5

 

 

minutes after heating program started. This error will also occur if the

 

 

program is started and the chamber door is kept open for 5 minutes or the

 

 

triac is defective, the heater plates are defective or there is a problem with

 

 

the main PC board.

 

 

 

17

Image 18
Contents F i n i t y TM Table of Contents Do Not Attempt Internal Service WarrantySafety Instructions IntroductionSpecifications Infinity M Infinity LInfinity M and L Display KEY Parts Identification and ExplanationFront Panel Figure DescriptionInfinity M and L Identification Lower Back Panel Figure Display DescriptionInfinity Lower Back Panel Installation Unpack and SET-UPVenting Instructions To Turn the Beep on and OFF Figure Operation Program and Operate ONE Stage Program FigureProgram and Operate TWO Stage Program Figure Program and Operate Three Stage Program Figure Program and Operate Four Stage Program Figure Review a Program Figure Edit While a Program is Running Figure While the program is runningHold Time Sample ONE Stage ProgramNight Time Heat Rate StageSample Three Stage Program Program with Cooling Error Codes Error Description Probable Cause CodeError Codes Temperature Calibration ServiceCleaning Instructions Temperature Calibration with Calibration Tablets FigurePower Failure Replacement of Door Insulation and SpringsField Service Replacement of Heating PlatesInfinity with Upper Rear Panel Removed Infinity MReplacement of the Main PC Board 115VPage Replacement of the Thermocouple Assembly PN Replacement of the Triac PN Spare Parts List Parts for Infinity M DescriptionParts for Infinity L Description Program Card Forms Program # MetalsHeat Temp Hold Rate Time Stage Program Card Forms Toll Free 1-800-JELRUS-1

M30, L30 specifications

The Infinity L30 and M30 are two notable offerings from Infinity, a company renowned for its commitment to high-quality audio technology and innovative designs. These speakers are designed to cater to audiophiles and enthusiasts alike, providing an immersive listening experience.

The Infinity L30 is a floor-standing speaker that emphasizes powerful sound and a stylish form factor. One of its key features is the incorporation of Infinity’s proprietary EMIT (Electromagnetic Induction Tweeter) technology. This technology is known for delivering exceptionally clear high frequencies, allowing listeners to experience the finer details in their music. The L30 also features a robust bass reflex design, which enhances low-frequency response, resulting in a richer sound experience. The speaker's design typically includes a high-quality, wooden cabinet that helps to minimize unwanted vibrations while adding an aesthetic appeal to any room.

On the other hand, the Infinity M30 is a bookshelf speaker designed for more compact environments without compromising sound quality. It shares several technologies with the L30, including the EMIT tweeter, ensuring that high-frequency reproduction remains clear and detailed. The M30's design also includes a rear-firing bass port, which helps to improve the bass response, making it suitable for a variety of setups, whether they are part of a home theater system or a dedicated stereo setup. The speaker is designed for versatility, easily fitting into various decor styles while delivering impressive sound quality.

Both speakers benefit from Infinity’s meticulous engineering, ensuring that they provide an exceptional audio experience. Features such as high-efficiency drivers, a wide frequency range, and the inclusion of durable materials contribute to their performance and longevity. Users can expect these speakers to produce sound with great accuracy and depth, making them ideal for genres ranging from classical to modern pop.

In summary, the Infinity L30 and M30 are exemplary models that showcase Infinity’s dedication to producing high-performance audio solutions. With advanced technologies, such as the EMIT tweeters, and thought-out designs aimed at maximizing sound quality, both models make powerful additions to any audio setup, promising to elevate the listening experience for users. Whether for music or movies, the L30 and M30 are sure to impress with their sonic capabilities and visual appeal.