Infinity L30, M30 manual Program and Operate Three Stage Program Figure

Page 12

OPERATION

PROGRAM AND OPERATE - THREE STAGE PROGRAM (Figure 1)

1.Follow Two Stage Program, Steps 1 - 4.

2.Press ENTER / REVIEW. STAGE 2 light turns off, STAGE 3 and HEAT RATE lights turn on. Main Display shows four heat rate choices. Choose one:

A. Select heat rate between 1°F - 30°F /min (1°C - 17°C /min) using

.

B. Select "FULL" to program maximum heat rate.

 

C. Select "COOL" to program the furnace to cool to a selected temperature.

D. Select "NO" to turn of STAGE 3 and 4. This will result in a Two Stage Program.

NOTE: The HEAT RATE cannot be programmed to "COOL" in STAGE 1 - only in STAGE 2, 3 or 4.

3. Press ENTER / REVIEW. HEAT RATE light turns off and TEMP light turns on. Enter

for the

temperature required: heating temperature up to a maximum of 2012°F (1100°C) or cooling

temperature down to a minimum of 100°F (38°C).

 

4. Press ENTER / REVIEW. TEMP light turns off and HOLD TIME light turns on. Enter

to program the

time needed to hold at the above temperature (0 - 4hrs.).

 

5.For three stages, the furnace must be programmed not to use STAGE 4. Follow these steps:

A. After completing Step 4, press ENTER / REVIEW. STAGE 3 light turns off, STAGE 4 and HEAT

RATE lights turn on.

B. Press . Main Display shows “....5,4,3,2,1, COOL, NO.” Select “NO” to program the

furnace not to use STAGE 4.

6.All necessary information for this program is now entered.

7.To run the program immediately, press START / STOP.

8.To delay the start of the program to be ready to cast at the pre-set time (see One Stage Program, Step 3), press NIGHT TIME (DELAY START).

NOTE: If NIGHT TIME (DELAY START) is pressed while a program is running, the time remaining for completion of the program will appear on the Main Display for 5 seconds.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents F i n i t y TM Table of Contents Warranty Safety InstructionsDo Not Attempt Internal Service IntroductionSpecifications Infinity M Infinity LInfinity M and L KEY Parts Identification and Explanation Front Panel FigureDisplay DescriptionInfinity M and L Identification Lower Back Panel Figure Display DescriptionInfinity Lower Back Panel Installation Unpack and SET-UPVenting Instructions To Turn the Beep on and OFF Figure Operation Program and Operate ONE Stage Program FigureProgram and Operate TWO Stage Program Figure Program and Operate Three Stage Program Figure Program and Operate Four Stage Program Figure Review a Program Figure Edit While a Program is Running Figure While the program is runningSample ONE Stage Program Night Time Heat RateHold Time StageSample Three Stage Program Program with Cooling Error Codes Error Description Probable Cause CodeError Codes Service Cleaning InstructionsTemperature Calibration Temperature Calibration with Calibration Tablets FigurePower Failure Replacement of Door Insulation and SpringsField Service Replacement of Heating PlatesInfinity with Upper Rear Panel Removed Infinity MReplacement of the Main PC Board 115VPage Replacement of the Thermocouple Assembly PN Replacement of the Triac PN Spare Parts List Parts for Infinity M DescriptionParts for Infinity L Description Program Card Forms Program # MetalsHeat Temp Hold Rate Time Stage Program Card Forms Toll Free 1-800-JELRUS-1

M30, L30 specifications

The Infinity L30 and M30 are two notable offerings from Infinity, a company renowned for its commitment to high-quality audio technology and innovative designs. These speakers are designed to cater to audiophiles and enthusiasts alike, providing an immersive listening experience.

The Infinity L30 is a floor-standing speaker that emphasizes powerful sound and a stylish form factor. One of its key features is the incorporation of Infinity’s proprietary EMIT (Electromagnetic Induction Tweeter) technology. This technology is known for delivering exceptionally clear high frequencies, allowing listeners to experience the finer details in their music. The L30 also features a robust bass reflex design, which enhances low-frequency response, resulting in a richer sound experience. The speaker's design typically includes a high-quality, wooden cabinet that helps to minimize unwanted vibrations while adding an aesthetic appeal to any room.

On the other hand, the Infinity M30 is a bookshelf speaker designed for more compact environments without compromising sound quality. It shares several technologies with the L30, including the EMIT tweeter, ensuring that high-frequency reproduction remains clear and detailed. The M30's design also includes a rear-firing bass port, which helps to improve the bass response, making it suitable for a variety of setups, whether they are part of a home theater system or a dedicated stereo setup. The speaker is designed for versatility, easily fitting into various decor styles while delivering impressive sound quality.

Both speakers benefit from Infinity’s meticulous engineering, ensuring that they provide an exceptional audio experience. Features such as high-efficiency drivers, a wide frequency range, and the inclusion of durable materials contribute to their performance and longevity. Users can expect these speakers to produce sound with great accuracy and depth, making them ideal for genres ranging from classical to modern pop.

In summary, the Infinity L30 and M30 are exemplary models that showcase Infinity’s dedication to producing high-performance audio solutions. With advanced technologies, such as the EMIT tweeters, and thought-out designs aimed at maximizing sound quality, both models make powerful additions to any audio setup, promising to elevate the listening experience for users. Whether for music or movies, the L30 and M30 are sure to impress with their sonic capabilities and visual appeal.
Top Page Image Contents