Electrical Requirements

NOTE: The outdoor sear burner drops into the enclosure opening and is supported by its side flanges. No bottom support is needed.

WARNING

Electrical Shock Hazard

E F

G	H

A. 12" (30.5 cm) minimum to sear	E. 7¹⁄₈" (18.1 cm)
burner or any accessory	F. Gas line location at rear of
B. 13¹⁄₂" (34.3 cm)	sear burner
C. 22¹¹⁄₁₆" (57.6 cm)	G. 10⁵⁄₈" (27.0 cm)
D. 2¹⁄₄" (5.7 cm)	H. 35¹⁄₂" (90.2 cm)

Built-in Outdoor Sear Burner Enclosure Ventilation for LP Gas:

An enclosure for an LP gas fuel tank is to be ventilated by openings at both the top and lower levels of the enclosure.

If converting to LP gas these vents are to be in the enclosure:

An enclosure for use with an LP gas fuel tank for built-in installation is to have at least one ventilation opening on an exposed exterior side located within 5" (12.7 cm) of the top and is to be a minimum of 20 in.2 (129.0 cm2). One ventilation opening within 1" (2.5 cm) of the bottom of the enclosure and the bottom opening is to be a minimum of 10 in.2 (64.5 cm2). All vent openings are to be unobstructed. Every opening is to be a minimum of ¹⁄₈" (0.32 cm) wide.

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure whether the infrared sear burner is properly grounded.

A120-volt, 60-Hz, AC-only, 15-amp, fused electrical supply is required.

It is recommended that a separate circuit servicing only this sear burner be provided.

The model/serial number rating plate is located on the right-hand side panel. See the following illustration.

A. Model/serial number plate

Recommended Ground Method

The outdoor infrared sear burner, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/ NFPA 70, or Canadian Electrical Code, CSA C22.1.

Copies of the standards listed above may be obtained from:

CSA International

20 in.2 (129.0 cm2) min. ventilation both sides

1" (2.5 cm) max.

10 in.2 (64.5 cm2) min. ventilation both sides

5" (12.7 cm) max.

8501 East Pleasant Valley Rd. Cleveland, Ohio 44131-5575

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

5" (12.7 cm) max.

A. 3 prong ground plug

B. 3-prong polarized type outdoor outlet

C. Ground prong

W10117506B specifications

The KitchenAid W10117506B is a versatile and innovative appliance that has quickly become a favorite among both professional chefs and home cooks. Designed to enhance the culinary experience, this kitchen gadget boasts a range of features, technologies, and characteristics that set it apart from its competitors.

One of the standout features of the KitchenAid W10117506B is its powerful motor. The appliance is equipped with a robust motor that allows for seamless mixing and blending, making it easy to whip up dough, batter, and various ingredients in no time. This powerful motor ensures consistent results, reducing the effort and time needed for food preparation.

The design of the W10117506B is both ergonomic and aesthetically pleasing. Its sleek lines and polished finish will complement any kitchen décor, while the compact size allows for easy storage. The user-friendly interface includes intuitive controls that make it simple to adjust speeds and settings, offering full control over the mixing process.

Another key technology in the KitchenAid W10117506B is its planetary mixing action. This innovative design rotates the mixing attachment around the bowl while also spinning around its axis, ensuring that all ingredients are thoroughly incorporated. This feature is particularly useful for achieving perfectly blended mixtures without the dreaded lumps or clumps that can occur with less advanced appliances.

In addition to its mixing capabilities, the W10117506B offers several attachments that enhance its functionality. These attachments allow users to perform a variety of tasks, such as kneading dough, shredding vegetables, or even making pasta. The versatility of this appliance makes it a valuable addition to any kitchen.

The construction of the KitchenAid W10117506B also deserves mention. Built from high-quality materials, it is designed for durability and longevity. This means that users can rely on it for years of dependable service without worrying about wear and tear.

In conclusion, the KitchenAid W10117506B is a must-have for anyone who spends time in the kitchen. Its powerful motor, ergonomic design, innovative mixing technology, versatile attachments, and durable construction make it an indispensable tool for culinary enthusiasts. Whether you are baking, whipping, or mixing, this appliance is sure to elevate your cooking experience to new heights.