Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Gas Supply Line Pressure Testing

Testing above ½ psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge):

The infrared sear burner and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures greater than ½ psig (3.5 kPa).

Testing below ½ psi (3.5 kPa) or 14" (35.5 cm) WCP (gauge) or lower:

The infrared sear burner must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psig (3.5 kPa).

Natural Gas:

Infrared sear burners are equipped for use with Natural gas. They are design-certified by CSA International for LP (propane or butane) gases with appropriate conversion.

Infrared sear burners are set for Natural gas use and have a pressure regulator with ¹⁄₂" (1.3 cm) female pipe threads.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149.1 - latest edition.

IMPORTANT: The infrared sear burner must be connected to a regulated gas supply.

Refer to the model/serial rating plate for information on the type of gas that can be used. If this information does not agree with the type of gas available, check with your local gas supplier.

Gas Conversion:

No attempt shall be made to convert the infrared sear burner from the gas specified on the model/serial rating plate for use with a different gas type without consulting the serving gas supplier. The conversion kits specified must be used.

Gas Pressure Regulator

The gas pressure regulator supplied with this infrared sear burner must be used. The inlet (supply) pressure to the regulator should be as follows for proper operation:

LP Gas:

Set pressure: 11" (27.9 cm) WCP

Inlet (supply) pressure: 11" to 14" (27.9 cm to 35.5 cm) WCP

Natural Gas:

Set pressure: 4" (10.2 cm) WCP

Inlet (supply) pressure: 7" to 14" (17.8 cm to 35.5 cm) WCP maximum.

Contact local gas supplier if you are not sure about the inlet (supply) pressure.

Burner Requirements for High Altitude

Input ratings shown on the model/serial rating plate are for elevations up to 2,000 ft (609.6 m).

For elevations above 2,000 ft (609.6 m), ratings are reduced at a rate of 4% for each 1,000 ft (304.8 m) above sea level. Orifice conversion is required. See “Assistance or Service” section to order.

A. Rear side of burner

B. ¹⁄₂" (1.3 cm) sear burner gas pipe

C. New CSA approved outdoor flexible gas supply line

The supply line shall be equipped with an approved shutoff valve. This valve should be located in the same area as the burner and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the appliance.

A. Gas supply line

B. Open position of shutoff valve

C. To sear burner

LP gas conversion from a local LP gas supply:

Conversion must be made by a qualified person. A qualified Natural gas technician shall provide the LP gas supply to the selected sear burner location in accordance with the National Fuel Gas Code ANSI Z2223.1/NFPA54 latest edition, and local codes.

To convert to LP gas, the LP Gas Conversion Kit Number W10118099 must be used. Follow Instructions included with kit.

LP gas conversion using a 20 lb LP fuel tank:

To convert to LP gas, the LP Gas Conversion Kit Number W10118099 must be used. Follow Instructions included with kit.

A 20 lb (9.1 kg) LP gas fuel tank must be purchased separately.

W10117506B specifications

The KitchenAid W10117506B is a versatile and innovative appliance that has quickly become a favorite among both professional chefs and home cooks. Designed to enhance the culinary experience, this kitchen gadget boasts a range of features, technologies, and characteristics that set it apart from its competitors.

One of the standout features of the KitchenAid W10117506B is its powerful motor. The appliance is equipped with a robust motor that allows for seamless mixing and blending, making it easy to whip up dough, batter, and various ingredients in no time. This powerful motor ensures consistent results, reducing the effort and time needed for food preparation.

The design of the W10117506B is both ergonomic and aesthetically pleasing. Its sleek lines and polished finish will complement any kitchen décor, while the compact size allows for easy storage. The user-friendly interface includes intuitive controls that make it simple to adjust speeds and settings, offering full control over the mixing process.

Another key technology in the KitchenAid W10117506B is its planetary mixing action. This innovative design rotates the mixing attachment around the bowl while also spinning around its axis, ensuring that all ingredients are thoroughly incorporated. This feature is particularly useful for achieving perfectly blended mixtures without the dreaded lumps or clumps that can occur with less advanced appliances.

In addition to its mixing capabilities, the W10117506B offers several attachments that enhance its functionality. These attachments allow users to perform a variety of tasks, such as kneading dough, shredding vegetables, or even making pasta. The versatility of this appliance makes it a valuable addition to any kitchen.

The construction of the KitchenAid W10117506B also deserves mention. Built from high-quality materials, it is designed for durability and longevity. This means that users can rely on it for years of dependable service without worrying about wear and tear.

In conclusion, the KitchenAid W10117506B is a must-have for anyone who spends time in the kitchen. Its powerful motor, ergonomic design, innovative mixing technology, versatile attachments, and durable construction make it an indispensable tool for culinary enthusiasts. Whether you are baking, whipping, or mixing, this appliance is sure to elevate your cooking experience to new heights.