Control Type T TTLix Letter, Power Rating

STANDARD MODELS

control Type T TTLix Letter

94 is Series 90	D:	is adjustable stroke
~~ I		(90° to 1 60°)
~~ I		No auxiliary switches
Power Rating		No auxiliary switches
8 is high torque	E:	is adjustable stroke
150 lb.-in. at		(90° to 1 60°)
standard timing		1 auxiliary switch
9 is high torque	F:	is adjustable stroke
300 lb.-in.at		(90° to 1 60°)
2 or 4 min timing		2 auxiliary switches
Output Drive
Output Drive
4 is dual-ended shaft,
non-spring return
1 is single-ended shaft,
non-spring return

NOTE: Some motors furnished to equipment manufactur- ers will have no adapter bracket, a single-ended shaft and/or no wiring box.

CONTROLLER TYPE: Series 90 Control Circuit-135 ohm series 90 proportioning controller. Series 90 high or low limit controller with manual minimum position po- tentiometer (with a combined total resistance of up to 500 ohms) may also be used in the control circuit.

MOTOR ROTATION: Normally closeda. The closed posi- tion is the limit of counterclockwise rotation as viewed from the power end of the motor. See Fig 2. Motor opens clockwise (as viewed from the power end). Motors are shipped in the closed position.

ELECTRICAL RATINGS:

	VOLTAGE		POWER
		CURRENT	CONSUMP-
		DRAW (A)	TfON (W)

Without	24	0.8	18
Transformer

With internal	120	0.24	23
Transformer
Transformer	208	0.14	23
	208	0.14	23

	240	0.12	23

STROKE: Field adjustable from 90” to 160”. Start position of shaft changes with adjustment of stroke. (Midpoint of stroke remains fixed as stroke is adjusted, as shown in Fig. 2.) Stroke is adjusted by means of cams located in wiring compartment. (See Stroke Setting Procedure.) Motors are shipped with stroke set at 90”.

DEAD WEIGHT LOAD ON SHAFT:

Power or Auxiliary End-200 lb. [90.8 kg] maximum. Maximum Combined Load-300 lb. [136 kg].

AMBIENT TEMPERATURE RATINGS: Maximum-150° F [66” C] @ 25% duty cycle. Minimum-minus 40” F [-40° C].

CRANKSHAFT: 318 inch [9.5mm] square M9484, M9494 have double-ended shaft. M9481, M9491 have single-ended shaft.

aThe normal position is the position the motor will assume with controller disconnected.

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::...............................:............................................................................ .. .. .. ...................

~~~~:ICYJ~:R.~~~~~~~~~~~~~

_..I	_	.........i _	..i	_	..............‘.:.~~‘_~~::.~.	t_~_._._._._._._._.‘
............. . . . . . . . ............	...	i	. . . . . . . . . . . . ..	i	. ....- ___._. ___:_~~r~_“:.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.~.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .,.._...:.,.,.	t_~_._._._._._._._.‘

WHEN PURCHASING REPLACEMENT AND MODERNIZATION PRODUCTS FROM YOUR AUTHORIZED DISTRIBUTOR, REFER TO THE TRADELINE CATALOG OR PRICE SHEETS FOR COMPLETE ORDERING NUMBER.

IF YOU HAVE ADDITIONAL QUESTIONS, NEED FURTHER INFORMATION, OR WOULD LIKE TO COMMENT ON OUR PRODUCTS OR SERVICES, PLEASE WRITE OR PHONE:

1.YOUR LOCAL HONEYWELL RESIDENTIAL AND BUILDING CONTROLS SALES OFFICE (CHECK WHITE

PAGES OF PHONE DIRECTORY).

2.RESlDENTlAL AND BUILDING CONTROLS CUSTOMER SERVICE HONEYWELL INC., 1885 DOUGLAS DRIVE NORTH MINNEAPOLIS, MINNESOTA 55422-4386 (612)542-7500

(IN CANADA-HONEYWELL LIMITED/HONEYWELL LIMITEE, 740 ELLESMERE ROAD, SCARBOROUGH, ONTARIO Ml P 2V9) INTERNATfONAL SALES AND SERVICE OFFICES IN ALL PRINCIPAL CITIES OF THE WORLD.

STANDARD MODELS