Beckett CF1400, CF2300 manual Potential for Fire, Smoke and Asphyxiation Hazards

Page 1

!WARNING

Potential for Fire, Smoke and Asphyxiation Hazards

Incorrect installation, adjustment, or misuse of this burner could result in death, severe personal injury, or substantial property damage.

To the Homeowner or Equipment Owner:

yPlease read and carefully follow all instructions pro- vided in this manual regarding your responsibilities in caring for your heating equipment.

yContact a professional, qualified service agency for in- stallation, start-up or service work.

ySave this manual for future reference.

To the Professional, Qualified Installer or Service Agency:

yPlease read and carefully follow all instructions pro- vided in this manual before installing, starting, or ser- vicing this burner or heating system.

yThe Installation must be made in accordance with all state and local codes having jurisdiction.

Form 6104 BCF23-R05

1

 

Image 1
Contents Potential for Fire, Smoke and Asphyxiation Hazards To the Professional, Qualified Installer or Service AgencyTo the Homeowner or Equipment Owner Table of Contents Specifications General InformationAgency approvals Professional Installer/Service Agency Responsibility Pre-installation checklistOwner’s Responsibility Follow These Instructions ExactlyCorrect Nozzle and Flow Rate Required Oil Supply Pressure Control Required‰ Fuel supply ‰ Nozzle pressure‰ Vent system Nozzle capacities‰ Verify burner components ‰ Verify firing rate‰ Verify air tube Air tube capacity Versus firebox pressureProtect Against Stray Light Lockout Mount the burnerProtect Against Dust Moisture Protect the Air Tube From Overheating‰ Check electrode settings ‰ Install nozzleMaintain Electrode Specifications ‰ Mount air tube to burner‰ Set dimension Z ‰ Install nozzle line assembly‰ Insert burner Burner installed in appliance frontFactory-Installed Pump Bypass Plug Install Oil Supply To SpecificationsConnect fuel lines Fuel unit gearset capacities One-pipe oil flow with B pumpElectrical Shock Hazard Wire the burner R7184BSequence of operation typical Sequence of operation TypicalKeep Service Access Covers Securely Installed Do Not Bypass Safety ControlsProfessional Installation Service Required Prepare the burner for start-upCF2300 Initial indicator adjustment plate settings CF1400 Initial indicator adjustment plate settingsDamper Motor with Cover ‰ Initial air settingsStart the burner Professional Service RequiredHot Gas Puff-back Heavy Smoke Hazard Explosion and Fire Hazard‰ Set high-fire air ‰ Start burner and vent air from oil line‰ Set low-fire air Annual Service Perform Regular MaintenanceMonthly maintenance by owner Annual Professional Service RequiredPart Name Replacement PartsDescription Flange a Flange B Flange C Burner Replacement PartsLimited Warranty Information Warranty
Related manuals
Manual 24 pages 24.93 Kb