General Information
Before you begin . . .
The following resources will give you addional information for your installation. We suggest that you consult these resources whenever possible. Pay particular attention to the appliance manufacturer’s instructions.
Appliance manufacturer’s instructions
Hazard definitions
Indicates an imminently
hazardous situation, which, if not avoided, will result in death, serious injury, or property
damage.
Indicates a potentially
hazardous situation, which, if not avoided, could result in death, severe personal injury,
and/or substantial property damage.
Indicates a potentially
hazardous situation, which, if not avoided, may result in personal injury or property
damage.
To the Owner:
Thank you for purchasing a Beckett burner for use with your heating appliance. Please pay attention to the Safety Warnings contained within this instruction manual. Keep this manual for your records and provide it to your qualified service agency for use in professionally setting up and maintaining your burner.
Your burner will provide years of efficient operation if it is professionally installed and maintained by a qualified service technician. If at any time the burner does not appear to be operating properly, immediately contact your qualified service agency for consultation.
We recommend annual inspection/service of your gas heating system by a qualified service agency.
Within the boundaries of the hazard warning, there will
Specifications
be information presented describing consequences if the warning is not heeded and instructions on how to avoid the hazard.
NOTICE
Intended to bring special attention to information, but not related to personal injury or property damage.
Agency approvals
yUL listed to comply with ANSI/ UL296 and certified to CSA B140.0.
yAccepted by N.Y.C. M.E.A.
yOther approvals may be available and must be specified at time of order.
Fuels
Firing Range
Motor (CF1400)
Motor (CF2300)
Ignition Trans.
Housing
Fuel Unit
Oil Nozzle
Dimensions
#1 or #2 Fuel Oil
BCF1400 - 4.0 to 13.6 gph BCF2300 - 7.0 to 19.9 gph
1/2 HP 3450 rpm 120/60 Hz Standard
6.5 amps @ 120 VAC
3/4 HP 3450 rpm 120/60 Hz Standard 12.5 amps @ 120 VAC
Optional Voltages: 240
208, 240, 480
50Hz Continuous Duty Cast aluminum 100 to 300 psig 45o to 70o Solid Refer to Figure 7.
Form 6104
3