InFocus QR80421, W59 manual 0.6 m, Important Operating Considerations for Safety

Page 5
Important Operating Considerations for Safety

Important Operating Considerations for Safety

Place the projector in a horizontal position no greater than 8 degrees off axis.

Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents.

Locate the projector at least 4' (1.2 m) away from any heating or cooling vents.

Use only approved ceiling mounts.

Warning: To prevent eye injury if the projector is ceiling mounted, wear protective eyewear before opening lamp door. A warning sticker is included with the user documentation. Place this sticker on the lamp door if the projector is mounted on the ceiling.

Only genuine InFocus lamps are tested for use in this projector. InFo- cus is not liable for the performance, safety or certification of any other lamps. The use of other lamps violates the projector warranty and voids all certification marks on this projector.

Use only the power cord provided. A surge-protected power strip is recommended.

Refer to this manual for proper startup and shutdown procedures.

Hg – Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org.

In the unlikely event of a lamp rupture, particles may exit through the projector vents. When the projector is turned on, keep people, food, and drinks out of the "keep out" area under and around the projector, as indicated by the "X" areas.

 

 

 

 

 

 

 

 

1

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2’

/

 

/

 

 

 

 

 

 

0.6 m

3’

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

8’

 

 

 

5

 

 

 

 

/

2.

 

.

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

/

 

 

 

 

 

 

 

4

m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty booklet.

4

Image 5
Contents 5100 IN5110 User’s GuideRegulatory models W59 QR80421Declaration of Conformity Remote Control WarningFCC Warning EN 55022 WarningPage Table of Contents 0.6 m Important Operating Considerations for SafetyIncluded Items IntroductionConnector Panel Projection angle in 16 10 mode default Positioning the projectorRequired computer connections Connecting a computerNetwork connect monitor cable connect RS-232cableconnect CAT-5cable ? No computer image? Get help on page Displaying a computer imageAdjusting the image Optional video connections Connecting a video deviceStandard video connections Displaying a video image Adjust the volume in the Audio menu Shutting down the projector Troubleshooting your setupPower Save Status Indicator Panel iconsProblem No startup screen startup screenSolution Plug power cable in, press power switch andin the following problem, “Image fuzzy resolution on your computer, as shownSet your computer’s display resolution to the native resolution of the projectorProblem Projector troubleshootingSolution Adjust keystone in the Picture menuTurn on/off Rear in Settings System menu Turn on/off Ceiling in Settings System menuCOLOR COLORstartup screen startup screenLamp won’t turn on, Temp light is lit page Lamp won’t turn on, Lamp light is lit pageCorrect image Still having problems?Image not centered on screen Using the keypad buttons Troubleshooting the remote Using the remote controlConnecting external speakers Using the audioTroubleshooting audio Optimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesUsing the menus Picture menu tings Service menu Advanced settingsComputer Video Standard Active IrisComputer Table 2 Split Screen Matrix Split Screen Menu Audio Settings menuSources SourceStartup Logo Screen SaveCapture New Blank ScreenBlank shows an empty screen Service Info provides information for service Cleaning the lens MaintenanceWARNINGS Replacing the projection lamplamp module handle reset lamp hours in Service menuloosen the captive screws on lamp module Using the security lock Cleaning the dust filterreset filter hours in Service menu security lock wait 45 minutes dust filter cover tabsProjected image size AppendixRS-232Port Settings Command ControlRead Command Examples SettingCommand Write Command ExamplesDefault FunctionAuto Image Corner Correction Horizontal Position Magnify Reset Lamp Hours Source Vertical Position Numerics INDEXH HDMI I image