Exit or Previous: Removes the Split Screen Menu (if Split Screen is on) or goes to the Picture menu (if Split Screen is off).
Split Screen: Check the box to turn on Split Screen, or
Main on Left/Right: Selects which side is the main (primary) side. Characteris- tics of the main side:
Source buttons, as well as Aspect Ratio and Auto Image buttons, affect the main side only (unsupported source combinations are prevented – see above table).
Only sound from the main side is audible.
When Split Screen is turned off, the main side is displayed full screen. Swap Left and Right: Switches the left and right sources.
Left/Right Settings: Adjusts aspect ratio, phase, tracking, and horizontal/ver- tical position for the left or right side.
Left/Right Source: Selects the source to display on the left or right side (some items will be disabled to prevent unsupported source combinations – see above table).
Source Info: Shows source information for the left and right sides.
Main Menu: Turns off Split Screen and goes to the Main Menu.
To program your remote’s Custom button to display the above Split Screen Menu: Go to the Main Menu > Settings > Custom Key menu and select Split Screen.
IMPORTANT - When Split Screen is on, some projector functions work dif- ferently:
The Main Menu and its
Autosource (source search), Closed Captions and Magnify are not available.
Most picture settings can’t be adjusted (e.g. Brightness, Contrast, Keystone, Overscan, Presets, etc.).
To change these settings:
Make sure the source you want to adjust is the main source (See above for a description of the main source. If needed, go to the Split Screen Menu and select Swap Left and Right or Main on Left/Right).
Turn off Split Screen (go to the Split Screen Menu, then select Main Menu, or
Change picture settings.
Turn on Split Screen (go to the Split Screen Menu, then check Split Screen).
Some
Split Screen Menu
32