11 Appliance Setup
A. Remove Shipping Materials
Remove shipping materials from inside or underneath the firebox.
Placing the Ember Material
Ember material is shipped with this gas appliance. To place the ember material:
• Embers CANNOT be placed directly over ports.
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.
C. Accessories
Install approved accessories per instructions included with accessories. See Service Parts List for appropriate accessories. Refer to Section 16.
WARNING
Shock or fire risk.
Use ONLY optional accessories approved for this appliance.
•Using
•Using
•Only Hearth & Home Technologies approved
accessories may be used safely.
•When placing Glowing Embers® onto the burner care should be taken so that the ports are not covered. Place the
EMBER MATERIAL |
Figure 11.1 Placement of Embers |
D. Ember Placement
WARNING
Explosion Risk.
•Follow ember placement instructions in manual.
•Do NOT place embers directly over burner ports.
•Replace ember material annually.
Improperly placed embers interferes with proper burner operation.
•Place Mystic Ember over burner surface and around base of burner. Do not cover any burner port holes. Use this material to give the appliance a realistic ash bed.
•Save the remaining ember materials for use during appliance servicing. The embers provided should be enough for 3 to 5 applications.
20 | Heat & Glo • |
|