Niles Audio ZR-6 manual Audio Settings, Display Settings, Keypad Configuration

SYSTEM SETTINGS

SETTING UP THE ZONE KEYPADS

Press the Play/Pause/Select key to select the highlighted menu option.

3. Press the Exit soft key to return to the previous mode.

AUDIO SETTINGS

A source device should be playing in the zone. To adjust the Audio Settings:

1.Select “Audio Settings” from the main setup menu. The audio settings menu will appear on the screen. The Back soft key returns to the previous menu.

The Exit soft key exits all setup menus and returns to the “Now Playing” screen.

2.Press the Vol + and Vol – keys to scroll through the menu options and highlight the desired function: “Treble,” “Bass,” or “Loudness.”

3.When “Treble” or “Bass” are highlighted, adjust the respective level using the < and > keys. The current level is indicated by the sliding bar graph. Press the Default soft key to reset the highlighted tone control to its center, neutral setting.

4.When “Loudness” is highlighted, toggle between on or off with the < and > keys. The default setting for loudness is on.

DISPLAY SETTINGS

The keypad display’s backlight will turn off after the elapsed time selected in this confi guration menu. However, the keypad buttons are always active, even when the backlight is off. Pressing any key activates the backlight, restarts the timeout clock, and performs the selected function. To enter the Display Settings mode:

1.Select “Display Settings” from the main setup menu. The display settings menu will appear on the screen. The Back soft key returns to the previous menu. The Exit soft key exits all setup menus and returns to the “Now Playing” screen.

2.Press the Vol + and Vol – keys to scroll through the menu options and highlight the desired function: “Contrast” or “Backlight Timeout.”

3.When “Contrast” is highlighted, adjust the respective level using the < and > keys. The current level is indicated by the sliding bar graph.

4.When “Backlight Timeout” is highlighted, adjust the time that the backlight stays on after any keypad activity in 10-second increments. The > key increases the time. The < key

decreases the time. A timeout setting of “0” means the backlight will always be on. “Always On” will appear in the screen. The maximum backlight timeout setting is 240 seconds (4 minutes).

5.The Niles key selects the last played source when the backlight is off and the zone is off. If the backlight never turns off, the feature is disabled.

KEYPAD CONFIGURATION

The Solo-6MD features a confi guration menu that accesses advanced settings usually performed at the time of installation. To enter the keypad confi guration mode:

1.Press-and-hold the Niles logo soft key (the middle key below the display) for approximately 10 seconds or until the Confi guration screen appears.

Release the button when the confi guration screen appears.

54 NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373