Hearth and Home Technologies SC60 owner manual Materials, Fireplace

Page 42

42

21-1/8 in. (537 mm)

A. Fireplace

13 Reference

12-1/2 in.

(318 mm)

25 in.

Dimensions

10-1/2 in.

(267 mm)

Heatilator•	Dia.
Heatilator•	25 in.
SC60•32838•RevY•	(635 mm)
SC60•32838•RevY•	Gas Knockout
WIP11/08	10-1/4 in.
	(260 mm)

(635 mm)

Damper

Handle

40-3/4 in.

(1035 mm)

	19-1/8 in.	35 in.
		(889 mm)
	(486 mm)

9 in.

(229 mm)

7-3/4 in.		36 in.

(197 mm)	(914 mm)

42-1/8 in.

(1070 mm)

10-1/2 in.

(267 mm)

Dia.

25 in.

(635 mm)

		Gas Knockout	40 in.
			(1016 mm)
			(effective height)
		Outside
		Air
9 in.
(229 mm)
	9-7/8 in.
1-1/8 in.	(251 mm)		3-7/8 in.
(29 mm)	10-1/4 in.		(98 mm)
3-1/2 in.	(260 mm)	18-3/4 in.

(89 mm)	(476 mm)

Materials

Image 42

Contents Wood Burning Fireplace Hot screen/mesh and glass doors will cause burnsFire Risk Listing Label Information/Location GrateNumber Table of Contents Installer GuideUser Guide Hearth & Home Technologies Limited Warranty CONDITIONS, Exclusions & Limitation of LiabilityHeatilator SC60 32838 Rev Y 11/08 WIP Non-Combustible Materials Listing and Code ApprovalsAppliance Certiﬁcation Combustible MaterialsOperating Instructions Your FireplaceHot glass will cause burns Grate Seasoned WoodStarting a Fire FirescreenOptional Components Glass DoorsVented Gas Log Sets & Gas Log Lighters Clear SpaceWood Fuel Disposal of Ashes Maintainance and ServiceChimney Inspection/Cleaning Creosote Formation and Need for RemovalInspect Grate Glass CleaningCheck Firebrick Frequency As desiredTroubleshooting Guide Start Fire Problems Possible Cause SolutionGetting Started Typical Fireplace SystemDesign and Installation Considerations DraftNegative Pressure Locating Fireplace & Chimney Frequently open doors Central heat outlets or returnsTools and Supplies Needed Fireplace System RequirementsInspect Fireplace and Components Framing & Clearances Select Fireplace LocationClearances Clearances to Combustible MaterialsSidewalls/Surrounds Frame the FireplacePosition the Fireplace Installation of FireplaceThings to Consider Place Protective Metal Hearth StripsFt min. from top of uppermost chimney section to air inlet Install Outside Air Kit To service or replace the fan kitChimney Assembly Chimney Requirements Height of Chimney ComponentsUsing Offsets/Returns ExampleInstall Chimney Air Kit Install Ceiling FirestopsAssemble Chimney Sections Install Attic Insulation Shield Prepare Attic Insulation ShieldFollowing steps should be skipped if using a chase Complete InstallationInstall Flashing Cut out Hole in RoofChimney Termination Requirements Flat RoofsChase Installations Construct the ChaseInstall Fireplace & Chimney Install Chase TopInstall Termination Cap ST375 Square Termination CapTS345/TS345P Square Termination Cap Field Constructed Shrouds ShroudsRadiation Shield Open Top Shroud TR342 caps require radiation shieldMailbox Style Shroud radiation shield required Roofed Style Shroud radiation shield requiredFinishing Hearth Extension= 1/k x inches of thickness Finishing Material HX3 or HX4 Hearth Ext or equivilent insulation Combustible Mantel Firebrick Installation 13 Side Brick InstallationWood Burning Inserts AccessoriesGas Log/Lighter Provision Gas Code, Ansi Z223.1Materials Fireplace1321 mm 406 mm Chimney Components Catalog #14-1/2 10-7/8 276 mm Parts Part number list on followingContact Information

Related manuals

Manual 48 pages 59.2 Kb