Hearth and Home Technologies COLBAY-INS owner manual Positioning the Logs

Page 19

G. Positioning the Logs

While still breakable, the logs do not become fragile until after the appliance is burned and they have cured. After curing, any handling must be done with care as breakage can easily occur.

Note: Logs have been designed to work specifically with the burner of this appliance. Exact placement will ensure proper operation of your gas appliance and reduce sooting.

Complete log installation.

51

4

23

Figure 8.15

After installing brick, install rear log (#1) over locating pins on log shelf, as shown.

Note: Locator pins are included in the log component package.

Figure 8.16

Install cover for refractory supports on left and right sides.

Install left log (#2) over locating pins on burner.

Figure 8.18

Install right log (#3) in empty space on burner.

Figure 8.19

Install "S" shaped log (#4) on pins on right and rear logs.

Figure 8.20

Install left twig (#5) on pin in left log resting just under "S" shaped log.

Left side

Right side

 

 

 

 

 

 

 

Figure 8.17

 

 

Figure 8.21

 

 

Quadra-Fire • Columbia Bay Insert • 7002-109 Rev. H • 10/08

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents COLBAY-INS What to do if you smell gasDo Discardnot Welcome to the Quadra-Fire Family Table of Contents Listing and Code Approvals Getting Started Installation to ensure maximum safety and benefitTools and Supplies Needed Hearth Framing and ClearancesSelecting Appliance Location Clearances to CombustiblesVent Termination Minimum Clearances Termination LocationsVent Information Venting and InstallationExhaust AIR Vent Pipe Termination CAP Adaptor Fuel Conversions Gas InformationConverting to LP Gas Valve Regulator Replacement Gas Connection Gas PressuresHigh Altitude Installations Wire Size Max. Length Recommendation for WireConnecting to the Appliance Standing Pilot Ignition System WiringPilot Remove Shipping Materials Appliance SetupAccessories Door Crown InstallationPanel Set Installation Grille InstallationBack of TOP Panel Screws Back of Side Panel Brick Clips Brick InstallationBaffle Supports Baffle Rear Brick PanelPositioning the Logs Mineral Wool Blower InstallationIncluded in kit Blower = 1/4 in mm female spade = 1/4 in mm male spade Air Shutter Adjustment Before Lighting Appliance Operating InstructionsLighting Appliance For Your Safety Read Before LightingInitial Break-in Procedure Frequently Asked QuestionsAfter Appliance is Lit Symptom Possible Causes Corrective Action TroubleshootingStanding Pilot Ignition System Symptom Possible Cause Corrective Action TroubleshootingTo Replace Separate Glass Pieces Glass ReplacementDoor Frame with Glass Assembly Replacement Maintaining and Servicing ApplianceNecessary. USE Caution When CLEANING/HANDLING Ceramic Burner Maintenance Tasks InspectReference Materials Appliance Dimension DiagramHHT Vent Components ListService Parts Log Set AssemblyStocked At Depot Service Parts ListDescription Serial # Part Number Bottom Firebox AssemblyCONDITIONS, Exclusions & Limitation of Liability Limited Lifetime Warranty Contact Information

COLBAY-INS specifications

Hearth and Home Technologies (HHT) has made significant strides in the hearth industry, and one of its standout offerings is the COLBAY-INS. This innovative indoor fireplace embodies the company's commitment to quality, efficiency, and design flexibility, catering to modern homeowners seeking a spectacular focal point for their living spaces.

The COLBAY-INS integrates state-of-the-art technology with elegant design. One of its most remarkable features is the advanced heat management system that optimally distributes warmth throughout the room. By utilizing a powerful, efficiency-driven heating mechanism, the COLBAY-INS ensures that energy consumption is minimized while still providing exceptional warmth. With an impressive thermal efficiency rating, it combines comfort and sustainability, making it an excellent choice for modern homes.

Another distinguishing characteristic of the COLBAY-INS is its large viewing area. The expansive glass front allows for an unobstructed view of the flames, creating a captivating ambiance that transforms any indoor setting. This allows homeowners to enjoy the aesthetic appeal of a traditional fire without the hassle and mess associated with wood-burning fireplaces. The glass is designed to be heat-resistant and easy to clean, ensuring that the beauty of the flames remains the focal point.

The COLBAY-INS also incorporates smart technology for enhanced user convenience. With options for remote operation and smart home integration, users can easily control the fireplace's settings from their smartphones or smart devices. This feature not only adds a layer of comfort but also allows for seamless integration into all home automation systems.

Safety is paramount in the design of the COLBAY-INS. It includes multiple safety features, such as a secure door mechanism that keeps flames contained and a built-in safety shut-off function that activates in the event of an overheating situation. The overall construction adheres to the highest safety standards, giving homeowners peace of mind.

Moreover, the COLBAY-INS offers a variety of customization options, including different hearth finishes and media beds. This ensures that it can beautifully complement any interior design theme, from sleek contemporary to rustic charm. Additionally, the dual-fuel capability allows users to choose between natural gas and propane, providing flexibility based on personal preferences and availability.

In summary, Hearth and Home Technologies' COLBAY-INS is an exceptional indoor fireplace that combines efficient heating, modern technology, and stylish design. With its impressive features, safety standards, and customization options, it serves as a beautiful centerpiece while enhancing the overall comfort of any home.
Top Page Image Contents