Hearth and Home Technologies Cinch Pipe & Termination Cap System Parts and Descriptions

Page 2

1Parts and Descriptions

DVP-TV

Vertical termination cap. Includes storm collar and

 

fastener pack.

DVP-TB1

Basement/window well termination cap. Includes fas-

 

tener pack.

DVP-TRAP1

Horizontal termination cap with 1-3/4 in. telescoping

 

fl ue. Includes DVP-WS wall shield with heat shield and

 

one fastener pack.

DVP-TRAP2Horizontal termination cap with 4 in. telescoping fl ue. Includes DVP-WS wall shield with heat shield and one fastener pack.

DVP-TRAPK1Vent kit containing DVP90ST 90° elbow, DVP-WS wall shield with heat shield, DVP-TRAP1 termination cap with telescoping fl ue and one fastener pack.

DVP-TRAPK2Vent kit containing DVP90ST 90° elbow, DVP-WS wall shield with heat shield, DVP-TRAP2 termination cap with telescoping fl ue and one fastener pack.

DVP-TVHWVertical Termination, high wind cap. Includes storm collar and fastener pack.

DVP-AS

Attic insulation shield

(not shown)

Brick extension kit

BEK

2Hearth & Home Technologies Inc. • Cinch Pipe & Term Caps • 4033-900 Rev K • 05/05

Page 1 Page 3
Image 2
Page 1 Page 3
Contents
Installation Instructions Any such action may cause a fire hazardParts and Descriptions Not shownCool ADD Trap CAP Specification Chart Top Vented Direct Vent Appliances Clearances for the Vent SectionsPenetrating a Wall Rear Vented Direct Vent AppliancesAssemble Pipe Sections Attaching Vent to the Firebox AssemblyAssemble Vent Sections Fire Risk Exhaust Fumes RiskAssemble Minimum Installation MI Sections Assemble Slip SectionsFire Risk Explosion Risk Asphyxiation Risk Disassemble Vent SectionsSecure the Vent Sections Burn Risk Install the Heat Shield and Horizontal Termination CapInstall the Horizontal Termination Cap Heat Shield Requirements for Horizontal TerminationVertical Penetration Framing Install the Firestop SpacerInstall Attic Insulation Shield Fire RiskInstall Roof Flashing and Vertical Termination Cap 20 Secure with Screws Roof Pitch Min. FtAssemble and Install Storm Collar Caulk around the top of the storm collar