Hearth and Home Technologies HUDBAY-INS owner manual Brick Installation, Retaining Tabs

Page 18

F. Brick Installation

The pilot shield has to be removed to install or remove the brick refractory. Removal of the bracket requires remov- ing two screws.

 

PILOT

PILOT

SHIELD

 

BRACKET

 

Figure 8.9

 

To install the baffle, slide it in at an angle and rotate upward, parallel with the firebox. Place baffle up against the heat exchangers in top of the firebox. Holding the baffle against the heat exchangers, slide the baffle towards the front of the appliance.

Note: To aid in brick installation, the burner may be removed.

Figure 8.10

Keeping the baffle elevated with your free hand, put the right side brick into position. Rest the baffle on the right side brick.

Still holding the baffle in place, install the left brick into position.

Figure 8.12

Bend retaining tabs on the left and right sides inward to hold brick in place.

RETAINING TABS

Figure 8.13

Install the rear brick. Slide it in at an angle and place it over the rear brick retainer. Hand bend retaining tabs up to hold brick in place. Slide baffle back until touching rear brick.

 

 

Figure 8.14

Figure 8.11

 

 

 

18

Quadra-Fire • Hudson Bay Insert • 7008-115 Rev. H • 10/08

Page 17 Page 19
Image 18
Page 17 Page 19
Contents What to do if you smell gas HUDBAY-INSDo Discardnot Welcome to the Quadra-Fire Family Table of Contents Listing and Code Approvals Tools and Supplies Needed Installation to ensure maximum safety and benefitGetting Started Read all of the instructions before starting the instaClearances to Combustibles Framing and ClearancesSelecting Appliance Location HearthTermination Locations Vent Termination Minimum ClearancesVenting and Installation Vent InformationExhaust AIR Vent Pipe Termination CAP Adaptor Converting to LP Gas Gas InformationFuel Conversions Screws Nuts Holding Burner PANValve Regulator Replacement Gas Pressures Gas Connection Check for GAS LeaksStanding Pilot Ignition System Wiring Recommendation for WireConnecting to the Appliance Wire Size Max. LengthPilot Door Crown Installation Appliance SetupAccessories Remove Shipping MaterialsGrille Installation Panel Set InstallationBack of TOP Panel Screws Back of Side Panel Brick Installation Retaining TabsPositioning the Logs Rear Brick Retaining TabsBlower Installation Mineral WoolIncluded in kit Blower = 1/4 in mm female spade = 1/4 in mm male spade Air Shutter Adjustment Operating Instructions Before Lighting ApplianceFor Your Safety Read Before Lighting Lighting ApplianceFrequently Asked Questions Initial Break-in ProcedureAfter Appliance is Lit Troubleshooting Symptom Possible Causes Corrective ActionStanding Pilot Ignition System Troubleshooting Symptom Possible Cause Corrective ActionMaintaining and Servicing Appliance Glass ReplacementDoor Frame with Glass Assembly Replacement To Replace Separate Glass PiecesMaintenance Tasks Inspect Necessary. USE Caution When CLEANING/HANDLING Ceramic BurnerAppliance Dimension Diagram Reference MaterialsVent Components List HHTLog Set Assembly Service PartsService Parts List DepotDescription Serial # Part Number Standing Pilot Valve Assembly StockedCONDITIONS, Exclusions & Limitation of Liability Limited Lifetime Warranty Contact Information

HUDBAY-INS specifications

Hearth and Home Technologies (HHT) has consistently set the benchmark in the hearth industry with its innovative products. One of its noteworthy offerings is the HUDBAY-INS, a vent-free gas fireplace insert designed to provide unparalleled comfort and efficiency in home heating. The HUDBAY-INS showcases a blend of modern technology, aesthetic appeal, and user-friendly features that cater to the evolving needs of homeowners.

At the heart of the HUDBAY-INS is its advanced vent-free technology. This allows the fireplace insert to operate without the need for flues or chimneys, resulting in an efficient heating solution that maximizes energy use. Homeowners can enjoy the benefits of a warm, inviting space without the complexities associated with traditional vented models. The vent-free design also simplifies installation, making it a versatile option suitable for various home layouts.

One of the standout features of the HUDBAY-INS is its adjustable flame. Users can customize their experience by controlling the height and intensity of the flames, allowing for a cozy ambiance that can be tailored to any occasion. Additionally, the insert is equipped with high-grade ceramic glass that provides both durability and a clear view of the mesmerizing flames, enhancing the visual appeal of any room.

Another important characteristic of the HUDBAY-INS is its safety features. The unit comes with a built-in Oxygen Depletion Sensor (ODS), which ensures that the fireplace will shut off automatically if oxygen levels become too low, providing peace of mind for families. This feature underscores HHT’s commitment to safety in home heating solutions.

Energy efficiency is a key consideration for modern homeowners, and the HUDBAY-INS excels in this area. With its ability to provide warmth without excessive energy consumption, the insert is an eco-friendly choice that aligns with sustainable living practices. It is compatible with various home designs, lending flexibility to those looking to enhance their interiors with functional yet stylish heating solutions.

Durability is another hallmark of the HUDBAY-INS. Constructed with high-quality materials, it promises longevity and reliable performance while also providing a range of customizable finishes to suit individual tastes. Whether one prefers a sleek modern look or a more traditional aesthetic, the HUDBAY-INS can seamlessly integrate into any environment.

In conclusion, the Hearth and Home Technologies HUDBAY-INS represents a perfect synthesis of innovative technology, safety features, and aesthetic versatility. It stands out as an era-defining product that prioritizes user comfort, energy efficiency, and design flexibility, making it an ideal choice for contemporary households seeking effective home heating solutions.
Top Page Image Contents