Pelco DVR5100 manual Installing the Remote Client, Minimum System Requirements

Installing the Remote Client

MINIMUM SYSTEM REQUIREMENTS

NOTE: Review the minimum PC requirements below before you install the DVR5100 remote client. Viewing up to 4SIF, 30/25 (National Television System Committee [NTSC]/Phase Alternating Line [PAL]) frames per second (fps) video on a standard PC places significant demands on the processing power of the PC. The DVR5100 remote client installation package checks critical aspects of the PC hardware to ensure that it is capable of supporting the processing load. Installation is halted if the PC hardware does not meet these requirements.

•Processor: Intel® Pentium® IV with 2.4 GHz, or Intel Core™ 2 Duo processor with 1.66 GHz minimum processor speed

•Memory: 512 MB of RAM

•Video: AGP VGA card with a minimum of 128 MB of video RAM, 1280 x 1024 display resolution, 32-bit color, and DirectX® 8.1 or later hardware acceleration, with support for monitors with 1280 x 1024 resolution

•Disk space: 1 GB of free disk space for the full application, and additional space to store video

•Monitor: VGA or XGA with 1280 x 1024 resolution, 32-bit color

•Operating system: Microsoft® Windows® XP Professional Service Pack 2 (SP2) only

INSTALLING THE REMOTE CLIENT APPLICATION

1.Close all programs, including any antivirus software.

2.Insert the DVR5100 Series Resource disc into the CD-ROM drive of your PC, and then wait for the dialog box to appear (refer to Figure 1).

Figure 1. Resources Disc Dialog Box

3.Click Remote Client Setup. The InstallShield Wizard dialog box appears. Follow the on-screen prompts to install the DVR5100 remote client application.

4.Once installed, the InstallShield Wizard Complete dialog box appears.

5.Click Finish.

C1697M-B (11/08) 11