If the gas logs have been factory installed they should not need to be positioned. If the logs have been packaged separately, refer to the following instructions.
CAUTION: Logs are fragile! Carefully remove the logs from the packaging.
1
4 5 6 7
2 3
Log Set Assembly: LOGS-GXT
PILOT
BRACKET BURNER BASEPAN
GRATE
Carefully remove the logs from the packaging. CAUTION: Logs are fragile!
LOG #1 (SRV339-701):Place log #1 in the back on the insert. Locate the left end of the log over the center of the pilot and the back side of the left end flush with the back of the pilot bracket. Pull the right end of the log forward until it touches the tab in the base pan.
LOG #2 (SRV339-702):Position log #2 by locating its slot over the tab on the front left of the burner. The slot in the left side of log #2 fits over the bar grate.
339-935 2/02
24 | Heat & Glo • Supreme-XTS, Grand-XTS • 349-901 Rev. G • 9/08 |
|
