Hearth and Home Technologies RBV4236IH, RBV4842IH Electrical Information, Recommendation for Wire

Page 21

10 Electrical Information

A. Recommendation for Wire

This appliance requires 110-120 VAC to be wired to the junc- tion box for use of optional accessories and for proper op- eration of the appliance.

B. Connecting to the Appliance

•This appliance may be used with a wall switch, wall mounted thermostat and/or a remote control.

•Follow parameters for locating thermostat (see individual thermostat instructions) to ensure proper operation of appliance.

•Use low resistance thermostat wire for wiring from ignition system to the wall switch and thermostat.

•Keep wire lengths short as possible by removing any excess wire length.

•Low voltage and 110 VAC voltage cannot be shared within the same wall box.

WARNING

Shock Risk

Explosion Risk

Do NOT wire 110V to valve.

Do NOT wire 110V to wall switch

•Incorrect wiring will damage millivolt values.

•Incorrect wiring will override IPI safety lockout and may cause explosion.

Note: This appliance must be elecrtrically wired and grounded in accordance with local codes or, in the absence of local codes, with National Electric Code ANSI/NFPA 70-latest edition or the Canadian Electric Code, CSA C221.1.

Heatilator • RBV4236/RBV4842 • 4048-210 Rev K • 02/07

21

Image 21

Contents What to do if you smell gas RBV4236IH RBV4236IT RBV4842IH RBV4842ITListing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals Getting Started Design and Installation ConsiderationsAsphyxiation Risk Negative PressureTools and Supplies Needed Inspect the Appliance and ComponentsAny such action may cause a ﬁre hazard Select Appliance Location Framing and ClearancesFire Risk Model #Construct the Appliance Chase Clearances Fire Risk Odor RiskRough Opening Model # Width Height Depth Max Mantel Leg or Perpendicular Wall Mantel ProjectionsVent Termination Minimum Clearances Termination LocationsFire Risk Explosion Risk Termination Caps Staggered HeightVent Information and Diagrams Vent GuidelinesVent System Conﬁguration Elbow Distance is 50% of vertical Vent height Pipe Clearances to Combustibles Vent Clearances and FramingWall Penetration Framing Vertical Penetration FramingAppliance Preparation Installing Outside Air KitSecuring and Leveling Appliance Gas and Electrical ConnectionsRisk of Smoke Spillage Fire Risk Attach Vent to Firebox Assembly Installing Vent Pipe Assemble Vent Sections Securing Vent SectionsFuel Conversion Gas Connection Gas InformationGas Pressure Gas Leak RiskCheck for GAS Leaks Connecting to the Appliance Recommendation for WireElectrical Information Shock Risk Explosion RiskShock Risk Intelliﬁre Ignition System WiringJunction Box Installation Facing Material FinishingClean the Appliance Appliance SetupAccessories Log AssemblyPlacing the Lava Rock and Vermiculite Lava Rock, Vermiculite, Rockwool PlacementReveal Log Set Log Removal/ReplacementGlass Doors HoodFire Risk Combustion Fumes Risk 16 Remove Screws Attaching Front Burner Support Air Shutter SettingOperating Instructions Before Operating This ApplianceFire Risk Burn Risk Check Appliance Draft High Limit Safety SwitchLighting the Appliance For Your Safety Read Before LightingFire Risk High Temperatures Frequently Asked QuestionsIssue Solutions After the Appliance is LitTroubleshooting Symptom Possible Causes Corrective ActionsIntelliﬁre Ignition System Symptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Inspect Maintenance Tasks Maintenance and Service TasksAppliance Dimension Diagram Reference MaterialsModel This page intentionally left blank Service Parts List Service Parts RBV4236 & RBV4842Description of Part RBV4236 & RBV4842Service Parts RBV4236 & RBV4842 DCKN-RBV 1112 RBV4236 & RBV4842 UD4 Uninsulated Duct Optional ComponentsLimited Lifetime Warranty Limited Lifetime WarrantyYear Limited Warranty How to Obtain ServiceDo Discardnot