Hearth and Home Technologies RBV4842IT, RBV4842IH, RBV4236IH, RBV4236IT Tools and Supplies Needed

Page 7

C. Tools and Supplies Needed

Before beginning the installation be sure that the following tools and building supplies are available.

Reciprocating saw

Framing material

Pliers

Hi temp caulking material

Hammer

Gloves

Phillips screwdriver

Framing square

Flat blade screwdriver

Electric drill and bits (1/4 in.)

Plumb line

Safety glasses

Level

Manometer

Voltmeter

Tape measure

Non-corrosive leak check solution

1/2 - 3/4 in. length, #6 or #8 Self-drilling screws One 1/4 in. female connection (for optional fan)

D. Inspect the Appliance and Components

WARNING

Inspect appliance and components for damage. Damaged parts may impair safe operation.

•Do NOT install damaged components.

•Do NOT install incomplete components.

•Do NOT install substitute components.

Report damaged parts to dealer.

The following B-vent components are needed for installa- tion. See Figure 2.2.

•Appliance

•Pipe components

•Firestops

•Attic insulation shield

•Elbows

•Strapping

•Roof flashing or chase top

•Termination cap

•Storm Collar

•Carefully remove the appliance and components from the packaging.

•The vent system components and trim doors are shipped in separate packages.

•The gas logs may be packaged separately and must be field installed.

•Report to your dealer any parts damaged in shipment, particularly the condition of the glass.

•Read all of the instructions before starting the installation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

Vertical

Termination

Cap

Storm

Collar

Roof

Flashing

Ceiling

Firestop

B-Vent Pipe

Sections

Figure 2.2 Typical Vertical Installation

WARNING

Hearth & Home Technologies disclaims any responsibility for, and the warranty will be voided by, the following actions:

•Installation and use of any damaged appliance or vent system component.

•Modification of the appliance or vent system.

•Installation other than as instructed by Hearth & Home Technologies.

•Improper positioning of the gas logs or the glass door.

•Installation and/or use of any component part not approved by Hearth & Home Technologies.

Any such action may cause a fire hazard.

Heatilator • RBV4236/RBV4842 • 4048-210 Rev K • 02/07

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents What to do if you smell gas RBV4236IH RBV4236IT RBV4842IH RBV4842ITListing Label Information/Location CongratulationsTable of Contents Listing and Code Approvals Getting Started Design and Installation ConsiderationsAsphyxiation Risk Negative PressureInspect the Appliance and Components Tools and Supplies NeededAny such action may cause a fire hazard Model # Framing and ClearancesSelect Appliance Location Fire RiskConstruct the Appliance Chase Fire Risk Odor Risk ClearancesRough Opening Model # Width Height Depth Max Mantel Leg or Perpendicular Wall Mantel ProjectionsTermination Caps Staggered Height Termination LocationsVent Termination Minimum Clearances Fire Risk Explosion RiskVent Guidelines Vent Information and DiagramsVent System Configuration Elbow Distance is 50% of vertical Vent height Vertical Penetration Framing Vent Clearances and FramingPipe Clearances to Combustibles Wall Penetration FramingAppliance Preparation Installing Outside Air KitFire Risk Gas and Electrical ConnectionsSecuring and Leveling Appliance Risk of Smoke SpillageSecuring Vent Sections Installing Vent PipeAttach Vent to Firebox Assembly Assemble Vent SectionsGas Leak Risk Gas InformationFuel Conversion Gas Connection Gas PressureCheck for GAS Leaks Shock Risk Explosion Risk Recommendation for WireConnecting to the Appliance Electrical InformationShock Risk Intellifire Ignition System WiringJunction Box Installation Facing Material FinishingLog Assembly Appliance SetupClean the Appliance AccessoriesPlacing the Lava Rock and Vermiculite Lava Rock, Vermiculite, Rockwool PlacementReveal Log Set Log Removal/ReplacementHood Glass DoorsFire Risk Combustion Fumes Risk 16 Remove Screws Attaching Front Burner Support Air Shutter SettingBefore Operating This Appliance Operating InstructionsFire Risk Burn Risk Check Appliance Draft High Limit Safety SwitchLighting the Appliance For Your Safety Read Before LightingAfter the Appliance is Lit Frequently Asked QuestionsFire Risk High Temperatures Issue SolutionsSymptom Possible Causes Corrective Actions TroubleshootingIntellifire Ignition System Symptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramModel This page intentionally left blank Service Parts List Service Parts RBV4236 & RBV4842Description of Part RBV4236 & RBV4842Service Parts RBV4236 & RBV4842 DCKN-RBV 1112 RBV4236 & RBV4842 UD4 Uninsulated Duct Optional ComponentsHow to Obtain Service Limited Lifetime WarrantyLimited Lifetime Warranty Year Limited WarrantyDo Discardnot

RBV4236IT, RBV4842IT, RBV4842IH, RBV4236IH specifications

Hearth and Home Technologies has consistently combined aesthetic elegance with advanced technology in their range of contemporary fireplaces. Among their notable products are the RBV4236IH, RBV4842IH, RBV4842IT, and RBV4236IT models, each designed to enhance the ambiance of any living space while providing optimal heating solutions.

The RBV4236IH is a 36-inch gas fireplace that exemplifies innovative design. This model is available in both direct vent and vent-free options, allowing users flexibility based on their installation needs. Its clean-face design provides a wide, unobstructed view of the flames, making it a captivating focal point in any room. Moreover, it features a modulating flame system that delivers consistent warmth while allowing users to customize the flame size for varying mood settings.

Moving to the RBV4842IH, this 42-inch model takes efficiency to new heights. It boasts an impressive heating capacity, suitable for larger spaces, and includes advanced flame technology that ensures realistic and visually striking flames. The RBV4842IH is equipped with adjustable media options, including glass and logs, providing versatility in styling to suit individual preferences.

The RBV4842IT offers similar dimensions and features to the RBV4842IH, but it focuses on ease of installation and maintenance. With an innovative installation kit and design, homeowners can set up this fireplace with minimal hassle. It also incorporates a state-of-the-art ignition system, allowing for reliable starts every time, even during colder months.

Lastly, the RBV4236IT, also a 36-inch option, is tailored for versatile installations, including both residential and commercial spaces. It integrates high-efficiency heating technology that maximizes warmth while minimally impacting energy costs. Additionally, its user-friendly remote control provides ease in operation, making it simple to adjust settings without leaving the comfort of your seat.

In summary, Hearth and Home Technologies' RBV series represents a perfect blend of style, efficiency, and innovation. With thoughtfully designed features, including customizable flame settings, adjustable media, and smart ignition systems, these models cater to a wide audience, ensuring that both aesthetics and heating needs are met with excellence. Whether you're in search of a contemporary centerpiece for your home or an efficient heating solution, the RBV4236IH, RBV4842IH, RBV4842IT, and RBV4236IT models stand out as premier choices.
Top Page Image Contents