Hearth and Home Technologies RBV4236IT, RBV4842IH Lava Rock, Vermiculite, Rockwool Placement

Page 26

E. Lava Rock, Vermiculite, Rockwool Placement

WARNING

Explosion Risk

•Follow rockwool placement instructions in this manual.

•Do NOT place rockwool directly over burner ports.

•Replace rockwool material annually.

Improperly placed rockwool interferes with proper burner operation.

Placing the Lava Rock and Vermiculite

•Place lava rock on top of the lava rock tray in front of and under the burner. See Figure 12.4.

•Sprinkle vermiculite evenly over area covered by lava rock. See Figure 12.5.

•It is not necessary to use entire bag of lava rock or vermiculite.

Figure 12.4 Placement of Lava Rock

Figure 12.5 Placement of Vermiculite

Placing the Rockwool

•Place 1/2 in. pieces of rockwool on the burner pan so that rockwool touches but does not cover the holes in the burner pan. See Figure 12.6.

•Place rockwool under the front logs as shown in Figure 12.7.

•It is not necessary to use all the rockwool.

Figure 12.6 Placement of Rockwool

Figure 12.7 Placement of Rockwool Under Front Logs

26	Heatilator • RBV4236/RBV4842 • 4048-210 Rev K • 02/07

Image 26

Contents RBV4236IH RBV4236IT RBV4842IH RBV4842IT What to do if you smell gasCongratulations Listing Label Information/LocationTable of Contents Listing and Code Approvals Design and Installation Considerations Getting StartedNegative Pressure Asphyxiation RiskAny such action may cause a ﬁre hazard Tools and Supplies NeededInspect the Appliance and Components Fire Risk Framing and ClearancesSelect Appliance Location Model #Construct the Appliance Chase Rough Opening Model # Width Height Depth ClearancesFire Risk Odor Risk Mantel Projections Max Mantel Leg or Perpendicular WallFire Risk Explosion Risk Termination LocationsVent Termination Minimum Clearances Termination Caps Staggered HeightVent System Conﬁguration Vent Information and DiagramsVent Guidelines Elbow Distance is 50% of vertical Vent height Wall Penetration Framing Vent Clearances and FramingPipe Clearances to Combustibles Vertical Penetration FramingInstalling Outside Air Kit Appliance PreparationRisk of Smoke Spillage Gas and Electrical ConnectionsSecuring and Leveling Appliance Fire RiskAssemble Vent Sections Installing Vent PipeAttach Vent to Firebox Assembly Securing Vent SectionsGas Pressure Gas InformationFuel Conversion Gas Connection Gas Leak RiskCheck for GAS Leaks Electrical Information Recommendation for WireConnecting to the Appliance Shock Risk Explosion RiskIntelliﬁre Ignition System Wiring Shock Risk Junction Box Installation Finishing Facing MaterialAccessories Appliance SetupClean the Appliance Log AssemblyLava Rock, Vermiculite, Rockwool Placement Placing the Lava Rock and VermiculiteLog Removal/Replacement Reveal Log SetFire Risk Combustion Fumes Risk Glass DoorsHood Air Shutter Setting 16 Remove Screws Attaching Front Burner SupportFire Risk Burn Risk Operating InstructionsBefore Operating This Appliance High Limit Safety Switch Check Appliance DraftFor Your Safety Read Before Lighting Lighting the ApplianceIssue Solutions Frequently Asked QuestionsFire Risk High Temperatures After the Appliance is LitIntelliﬁre Ignition System TroubleshootingSymptom Possible Causes Corrective Actions Symptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Maintenance and Service Tasks Inspect Maintenance TasksModel Appliance Dimension DiagramReference Materials This page intentionally left blank Service Parts RBV4236 & RBV4842 Service Parts ListRBV4236 & RBV4842 Description of PartService Parts RBV4236 & RBV4842 DCKN-RBV 1112 RBV4236 & RBV4842 Optional Components UD4 Uninsulated DuctYear Limited Warranty Limited Lifetime WarrantyLimited Lifetime Warranty How to Obtain ServiceDo Discardnot