Hearth and Home Technologies SL-750TV-IPI-E After Fireplace is Lit, Frequently Asked Questions

Page 12

J. After Fireplace is Lit

Initial Break-in Procedure

•The fireplace should be run three to four hours continuously on high.

•Turn the fireplace off and allow it to completely cool.

•Remove fixed glass assembly. See Section 14.G.

•Clean fixed glass assembly. See Section 3.

•Replace the fixed glass assembly and run continuously on high an additional 12 hours.

This cures the materials used to manufacture the fire- place.

NOTICE! Open windows for air circulation during fire- place break-in.

•Some people may be sensitive to smoke and odors.

•Smoke detectors may activate.

K.Frequently Asked Questions

ISSUE

SOLUTIONS

 

 

Condensation on the glass

This is a result of gas combustion and temperature variations. As the appliance warms, this

condensation will disappear.

 

 

 

Blue flames

This is a result of normal operation and the flames will begin to yellow as the appliance is al-

lowed to burn for 20 to 40 minutes.

 

 

 

 

When first operated, this appliance may release an odor for the first several hours. This is

Odor from appliance

caused by the curing of the paint and the burning off of any oils remaining from manufacturing.

Odor may also be released from finishing materials and adhesives used around the appli-

 

 

ance.

 

 

 

This is a normal result of the curing process of the paint and logs. Glass should be cleaned

Film on the glass

within 3 to 4 hours of initial burning to remove deposits left by oils from the manufacturing

process. A non-abrasive cleaner such as gas fireplace glass cleaner may be necessary. See

 

 

your dealer.

 

 

 

Noise is caused by metal expanding and contracting as it heats up and cools down, similar to

Metallic noise

the sound produced by a furnace or heating duct. This noise does not affect the operation or

 

longevity of the appliance.

 

 

Is it normal to see the pilot flame burn

In an Intellifire ignition system it is normal to see the pilot flame, but it should turn off when

continually?

ON/OFF is turned off.

 

 

12

Heat & Glo • SL-550 / 750 / 950TV-IPI-E • 2119-900 Rev. H • 11/08

Page 11 Page 13
Image 12
Page 11 Page 13
Contents What to do if you smell gas Hot glass will cause burnsCongratulations Homeowner Reference InformationTable of Contents User GuideAppliance Setup TroubleshootingReference Materials CONDITIONS, Exclusions & Limitation of Liability Limited Lifetime Warranty Listing and Code Approvals Appliance CertificationTempered Glass Specifications BTU SpecificationsHigh Altitude Installations Non-Combustible Materials SpecificationCombustible Materials Specification Electrical CodesGas Fireplace Safety Operating Instructions User GuideYour Fireplace Fixed Glass Assembly Remote Controls, Wall Controls and Wall SwitchesFan Kit optional Decorative Doors and FrontsTurn off all electric power to the appliance On position. The ON/OFF switch mayLighting Instructions IPI Final inspection byFrequently Asked Questions After Fireplace is LitMaintenance and Service Maintenance Tasks-HomeownerGlass Cleaning Remote ControlMaintenance Tasks-Qualified Service Technician Gasket Seal and Glass Assembly InspectionVenting LogsEither cobrahead or SIT Getting Started Typical Appliance SystemDesign and Installation Considerations Tools and Supplies NeededInspect Appliance and Components Any such action may cause a fire hazardNegative Pressure Framing and Clearances Selecting Appliance LocationModel Minimum Constructing the Appliance Chase ClearancesModels Mantel and Wall Projections Combustible MantelsTermination Locations Vent Termination Minimum ClearancesVent Information and Diagrams Vent GuidelinesVent System Configuration Models Pipe SizeVent Clearances and Framing Pipe Clearances to CombustiblesWall and Ceiling Penetration Framing Vertical Penetration FramingInstalling Outside Air Kit Damper Assem- bly Appliance PreparationGas and Electrical Connections Securing and Leveling the ApplianceInstalling Vent Pipe Assembly of Vent SectionsInstall Attic Insulation Shield Securing Vent SectionsGas Information Fuel ConversionGas Pressure Gas ConnectionWiring Requirements Optional Accessories RequirementsElectrical Information Code CSA C22.1Ignition Module 3 VAC Transformer PLUG-IN Junction Box Installation Wall Switch Installation for Fan OptionalDimensions of Combustibles FinishingNoncombustible Facing Diagram Facing MaterialAppliance Setup Remove Glass AssemblyClean the Appliance AccessoriesLava Rock, Mineral Wool/Ember Placement Placing the Lava RockInstall the Log Assembly PIN Hole Install the Mesh Install Trim and/or SurroundInstall Hood Air Shutter SettingTroubleshooting Symptom Possible Cause Corrective ActionIntellifire Ignition System Ues to spark, and main Appliance Dimension Diagram Reference MaterialsLog Set Assembly Service PartsService Parts List At DepotSL-750TV-IPI-E SL-750TV-IPI-E SL-950TV-IPI-E SL-950TV-IPI-E StockedSL-550 / 750 / 950TV-IPI-E Contact Information

SL-950TV-IPI-E, SL-550TV-IPI-E, SL-750TV-IPI-E specifications

Hearth and Home Technologies has long been a leader in the fireplace industry, renowned for blending innovation with functionality in their products. Among their impressive line-up, the SL-550TV-IPI-E, SL-750TV-IPI-E, and SL-950TV-IPI-E models stand out for their exceptional quality and advanced features, catering to various heating needs and aesthetic preferences.

The SL-550TV-IPI-E is designed for those wanting an efficient, stylish fireplace that fits seamlessly into modern living spaces. It offers a sleek design with expansive viewing areas, allowing for a captivating flame display. Its innovative IntelliFire Plus technology enhances convenience and efficiency by providing reliable, electronic ignition, which can be managed via a remote control. Noteworthy is the model's ability to operate with granular control, allowing users to adjust the flame height and heat output according to their needs.

Next, the SL-750TV-IPI-E steps up the game with its larger size and increased heating capacity. This model is perfect for medium to large rooms, providing excellent warmth while maintaining an elegant ambiance. Like the SL-550TV-IPI-E, it utilizes the IntelliFire Plus system for ease of use. In addition, it features a stunning firebox design that emphasizes authenticity with realistic logs and glowing embers, creating a true hearth experience. Its large viewing area enhances the visual impact, making it a focal point in any room.

Lastly, the SL-950TV-IPI-E is at the pinnacle of this series, offering the largest footprint and highest heating efficiency. Specifically designed for larger areas, this model not only delivers significant warmth but also serves as an impressive architectural feature. The SL-950TV-IPI-E integrates advanced heating technologies to maximize efficiency while minimizing fuel consumption. The remote control operation and customizable flame settings provide an exceptional level of convenience for homeowners.

All three models boast a range of customizable options, including finishes and surroundings, allowing them to fit a variety of decor styles. Their construction emphasizes quality, with durable materials designed to withstand the test of time. Furthermore, the sealed combustion system ensures safety and efficiency by drawing air from outside, reducing indoor air pollution.

In summary, the SL-550TV-IPI-E, SL-750TV-IPI-E, and SL-950TV-IPI-E models from Hearth and Home Technologies offer a harmonious blend of technology, aesthetics, and efficiency. Whether for ambiance or heating, these fireplaces provide a robust solution to enhance modern living spaces.
Top Page Image Contents