Hearth and Home Technologies ST42A owner manual Clearances, Mm min

Page 10

B. Clearances

WARNING

Fire Risk

• Comply with all minimum clearances to combustibles as specifi ed.

Failure to comply may cause fi re.

Storm Collar

Roof Flashing

2 in. min.

(51 mm)

(attic)

2 in. (51 mm) min.

Firestop Spacer

2 in. (51 mm) min.

2 in. (51 mm) min.

Attic

Insulation

Shield

Firestop Spacer

(ceiling)

2 in. (51 mm) min.

Offset/Return with hanger straps

(ceiling)

2 in. (51 mm) min.

Must have 2 in. (51 mm)

minimum clearance

to header

0 in. to level of standoffs

0 in.

1/2 in. (13 mm) to side of appliance

to floor

Figure 3.2 Clearances to Combustible Materials

10

Heatilator • ST42A • 35038 Rev G • 02/05

Image 10 Contents
ST42A Fire RiskGrate Homeowner Reference InformationListing Label Information/Location NumberTable of Contents Appliance Certification Listing and Code ApprovalsNot intended for use as a primary heat source Negative Pressure Design and Installation ConsiderationsGetting Started Asphyxiation Risk Marginal Location Typical Fireplace System Typical Fireplace SystemInspect Fireplace and Components Tools and Supplies NeededFire Risk Explosion Risk Framing and Clearances Selecting Fireplace LocationClearances Mm minSidewalls/Surrounds Frame the FireplaceConstruct the Chase Chimney RequirementsSharp Edges Fire Risk Asphyxiation Risk Installation of FireplaceInstall the Outside Air Kit Risk of Smoke SpillagePlace the Protective Metal Hearth Strips Secure the FireplacePosition the Fireplace Level the FireplaceChimney Assembly C,f Using Offsets/Returns SL1106 SL1112 SL1118 SL1136 SL1148Install the Firestop Spacers Assemble the Chimney SectionsDouble-check the Chimney Assembly Install the Attic Insulation ShieldSecure the Chimney Complete the Enclosure Chimney TerminationInstall the Chimney Air Kit required in Canada Chase TopInstall the Termination Cap Installing an ST1175 Square Termination CapGas Log/Lighter Provisions AccessoriesGas Code, Ansi Z223.1-1980 Hearth Extension FinishingHearth Extension Insulation Alternatives, R Value = Glass Doors Finishing MaterialMantel Operating Instructions General InformationClear Space Near the Fireplace Outside AirFirescreen Flue DamperFirewood GrateWood Fuel MoistureStarting a Fire Troubleshooting Understanding Vent ProblemsSolutions Diagnostics and Problem SolvingDiagnostic Questions Can’t get a good fire going. What am I doing wrong?fireplace burns the wood too fast. What can I do? Disposal of Ashes Maintenance and Servicing the FireplaceChimney Inspection/Cleaning Firebox RefractoryClean Maintenance Task ListWhen cleaning glass door Chimney FireFireplace Dimensions Reference MaterialsFireplace Components Model # DescriptionChimney Components Catalog #15-1/4 387 mm 25-1/4 641 mm 14-3/4 375 mm Shroud TS345 TR342 TR342 / 344 TV TR11 / 11T TR11 / 11T TV Woodburning Termination CapTR442 TR442 / 444 TV Service Parts ST42# Description of Part QtyLimited Warranty Contact Information