Hearth and Home Technologies ST42A owner manual Listing and Code Approvals, Appliance Certification

Page 4

1

Listing and Code Approvals

 

 

 

 

 

 

A. Appliance Certification

 

 

WARNING

 

This fi replace system has been tested and listed in accor-

 

dance with UL 127 standards by Underwriters Laboratories

 

 

Improper installation, adjustment, alteration, service

 

Inc. for installation and operation in the United States and

 

or maintenance can cause injury or property damage.

 

Canada.

Refer to the owner’s information manual provided with

 

This fi replace has been tested and listed for use with the op-

this fi replace. For assistance or additional information

 

consult a qualifi ed installer, service agency or your

 

tional components specifi ed in this manual. These optional

 

dealer.

 

components may be purchased separately and installed at

 

 

 

a later date. Installation of an outside air kit will require sig-

 

 

nifi cant reconstruction and is best if installed at the time of

 

 

fi replace installation.

 

 

Not intended for use as a primary heat source.

 

Heatilator is a registered trademark of Hearth & Home Tech-

 

This fi replace is tested and approved as a decorative fi re-

 

nologies Inc.

 

 

 

 

place. It should not be factored as a primary heat source

 

 

 

 

in residential heating calculations.

 

 

 

 

 

 

 

WARNING

 

 

 

 

Fire Risk

 

 

 

• Do not install or operate damaged fi replace.

 

 

 

• Do not modify fi replace.

 

 

 

• Installation other than as instructed by Hearth & Home

 

 

 

Technologies Inc. is strictly prohibited.

 

 

 

• Do not operate the fi replace without fully assembling

 

 

 

all components.

 

 

 

• Do not overfire.

 

 

 

• Do not install an unvented gas log set. This fi replace

 

 

 

has not been tested for use with unvented gas log

 

 

 

sets.

 

 

 

• Installation and/or use of any component part not

 

 

 

approved by Hearth & Home Technologies.

 

 

 

Hearth & Home Technologies disclaims any responsibility

 

 

 

for, and the warranty and agency listing will be voided by

 

 

 

the above actions.

 

 

 

 

 

 

 

 

4

Heatilator • ST42A • 35038 Rev G • 02/05

Page 3 Page 5
Image 4
Page 3 Page 5
Contents ST42A Fire RiskHomeowner Reference Information Listing Label Information/LocationGrate NumberTable of Contents Appliance Certification Listing and Code ApprovalsNot intended for use as a primary heat source Design and Installation Considerations Getting StartedNegative Pressure Asphyxiation RiskMarginal Location Typical Fireplace System Typical Fireplace SystemInspect Fireplace and Components Tools and Supplies NeededFire Risk Explosion Risk Framing and Clearances Selecting Fireplace LocationClearances Mm minSidewalls/Surrounds Frame the FireplaceConstruct the Chase Chimney RequirementsInstallation of Fireplace Install the Outside Air KitSharp Edges Fire Risk Asphyxiation Risk Risk of Smoke SpillageSecure the Fireplace Position the FireplacePlace the Protective Metal Hearth Strips Level the FireplaceChimney Assembly C,f Using Offsets/Returns SL1106 SL1112 SL1118 SL1136 SL1148Install the Firestop Spacers Assemble the Chimney SectionsDouble-check the Chimney Assembly Install the Attic Insulation ShieldSecure the Chimney Complete the Enclosure Chimney TerminationInstall the Chimney Air Kit required in Canada Chase TopInstall the Termination Cap Installing an ST1175 Square Termination CapGas Log/Lighter Provisions AccessoriesGas Code, Ansi Z223.1-1980 Hearth Extension FinishingHearth Extension Insulation Alternatives, R Value = Glass Doors Finishing MaterialMantel Operating Instructions General InformationOutside Air FirescreenClear Space Near the Fireplace Flue DamperGrate Wood FuelFirewood MoistureStarting a Fire Troubleshooting Understanding Vent ProblemsDiagnostics and Problem Solving Diagnostic QuestionsSolutions Can’t get a good fire going. What am I doing wrong?fireplace burns the wood too fast. What can I do? Maintenance and Servicing the Fireplace Chimney Inspection/CleaningDisposal of Ashes Firebox RefractoryMaintenance Task List When cleaning glass doorClean Chimney FireFireplace Dimensions Reference MaterialsFireplace Components Model # DescriptionChimney Components Catalog #15-1/4 387 mm 25-1/4 641 mm 14-3/4 375 mm Shroud TS345 TR342 TR342 / 344 TV TR11 / 11T TR11 / 11T TV Woodburning Termination CapTR442 TR442 / 444 TV Service Parts ST42# Description of Part QtyLimited Warranty Contact Information

ST42A specifications

Hearth and Home Technologies ST42A is a highly regarded product in the realm of home heating, known for its excellent combination of functionality, efficiency, and aesthetic appeal. This stylish gas fireplace offers the perfect blend of modern design and superior technology, making it an ideal choice for homeowners seeking both comfort and elegance.

One of the main features of the ST42A is its remarkable heating capacity. With a BTU output ranging from 26,000 to 36,000, it efficiently warms spaces, making it suitable for medium to large living areas. This gas fireplace is designed to deliver heat effectively while maximizing energy efficiency, allowing users to enjoy warmth without incurring excessive energy costs.

The ST42A comes equipped with an advanced electronic ignition system, ensuring reliable startup and operation. This system not only adds convenience but also enhances safety, as it minimizes the risk of gas leaks. The fireplace is designed to operate on natural gas or propane, offering flexibility to homeowners based on their fuel availability and preferences.

In terms of design, the ST42A boasts a contemporary look that fits seamlessly into a variety of interior styles. Its large viewing area, framed by a stylish surround, allows for an impressive flame presentation that serves as a focal point in any room. The variable flame height adjustment feature allows users to customize the ambiance and comfort level, further enhancing the overall experience.

One of the standout technologies in the ST42A is its unique heat distribution system. This feature ensures that warmth is circulated throughout the room, rather than being concentrated in one area, promoting an even temperature distribution. Additionally, the fireplace is equipped with optional blower kits that can enhance air circulation, further improving the efficiency of heat delivery.

Maintenance is another significant consideration with any heating appliance, and the ST42A simplifies this with accessible components and easy cleaning features. The ceramic glass front is designed to resist soot buildup, ensuring a clear view of the flames and reducing the need for frequent upkeep.

Overall, the Hearth and Home Technologies ST42A stands out as a premium choice for those looking to add warmth and style to their home. With its powerful heating capabilities, advanced technologies, and elegant design, it represents an investment in both comfort and aesthetic enhancement for any living space.
Top Page Image Contents