Hearth and Home Technologies ST42A owner manual Homeowner Reference Information, Grate, Number

Page 2

Read this manual before installing or operating this fireplace.

Please retain this owner’s manual for future reference.

Congratulations!

Congratulations on selecting a Heatilator wood burning fi re- place. The Heatilator fireplace you have selected is designed to provide the utmost in safety, reliability and efficiency.

As the owner of a new fi replace, you’ll want to read and care- fully follow all of the instructions contained in this owner’s manual. Pay special attention to all cautions and warnings.

This owner’s manual should be retained for future reference. We suggest you keep it with your other important documents and product manuals.

The information contained in this owner’s manual unless noted otherwise, applies to all models and gas control systems.

Your new Heatilator wood burning fireplace will give you years of durable use and trouble-free enjoyment. Welcome to the Heatilator family of fi replace products!

Homeowner Reference Information

We recommend that you record the following pertinent information about your fi replace:

Model Name:

 

Date purchased/installed:

 

Serial Number:

 

Location on fi replace:

 

Dealership purchased from:

 

Dealer phone:

 

Notes:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listing Label Information/Location

The model information regarding your specifi c fi replace can be found on the rating plate located on the smoke shield of the fi replace.

Serial

Grate

Fireplace

Number

Model

 

FIREPLACE .

WARNING: RISK OF

MODEL .

FIRE DAMAGE. REPLACE

 

GRATE WITH HEARTH & HOME

 

 

TECHNOLOGIES INC.

 

MODEL .

MFG. DATE

FIRECHAMBER INTENDED FOR USE WITH HEARTH & HOME TECHNOLOGIES INC. LISTED FIREPLACE PARTS. SEE INSTALLATION AND OPERATING INSTRUCTIONS FOR THIS MODEL. ONLY HEARTH & HOME TECHNOLOGIES INC. GLASS DOOR KITS CAN BE INSTALLED ON THIS UNIT.

FIREPLACE ALSO FOR USE

YES

IN MANUFACTURED HOMES

 

NO

CLEARANCE TO

CHIMNEY

FIREBOX

COMBUSTIBLES:

2 IN. MIN.

 

IN.

MIN.

FAN KIT MODEL NO.

&

RATED AT

115 VOLTS, 50/60 Hz.,

AMP.

DO NOT OVERFIRE. USE ONLY: SOLID WOOD FUEL OR LISTED DECORATIVE GAS APPLIANCE. DO NOT USE A FIREPLACE INSERT OR OTHER PRODUCTS NOT SPECIFIED FOR USE WITH THIS PRODUCT. IF DOORS ARE USED OPERATE FIREPLACE WITH DOORS FULLY OPEN OR CLOSED ONLY. WHEN BURNING A DECORATIVE GAS APPLIANCE IN THE FIREPLACE, ADJUST DAMPER TO THE FULLY OPEN POSITION.

WARNING! THIS FIREPLACE HAS NOT BEEN TESTED WITH AN UNVENTED GAS LOG SET. TO REDUCE THE RISK OF FIRE OR INJURY, DO NOT INSTALL AN UNVENTED GAS LOG SET INTO FIREPLACE.

WARNING! THIS APPLIANCE IS NOT FOR USE AS COOKING EQUIPMENT.

IF INSTALLATION OR OPERATING INSTRUCTIONS ARE MISSING CONTACT: HEARTH & HOME TECHNOLOGIES INC.,

1915 W. SAUNDERS ST., MT. PLEASANT, IA 52641.

2

Heatilator • ST42A • 35038 Rev G • 02/05

Image 2 Contents
ST42A Fire RiskGrate Homeowner Reference InformationListing Label Information/Location NumberTable of Contents Not intended for use as a primary heat source Listing and Code ApprovalsAppliance Certification Negative Pressure Design and Installation ConsiderationsGetting Started Asphyxiation RiskMarginal Location Typical Fireplace System Typical Fireplace SystemFire Risk Explosion Risk Tools and Supplies NeededInspect Fireplace and Components Framing and Clearances Selecting Fireplace LocationClearances Mm minSidewalls/Surrounds Frame the FireplaceConstruct the Chase Chimney RequirementsSharp Edges Fire Risk Asphyxiation Risk Installation of FireplaceInstall the Outside Air Kit Risk of Smoke SpillagePlace the Protective Metal Hearth Strips Secure the FireplacePosition the Fireplace Level the FireplaceChimney Assembly C,f Using Offsets/Returns SL1106 SL1112 SL1118 SL1136 SL1148Install the Firestop Spacers Assemble the Chimney SectionsSecure the Chimney Install the Attic Insulation ShieldDouble-check the Chimney Assembly Complete the Enclosure Chimney TerminationInstall the Chimney Air Kit required in Canada Chase TopInstall the Termination Cap Installing an ST1175 Square Termination CapGas Code, Ansi Z223.1-1980 AccessoriesGas Log/Lighter Provisions Hearth Extension Insulation Alternatives, R Value = FinishingHearth Extension Mantel Finishing MaterialGlass Doors Operating Instructions General InformationClear Space Near the Fireplace Outside AirFirescreen Flue DamperFirewood GrateWood Fuel MoistureStarting a Fire Troubleshooting Understanding Vent ProblemsSolutions Diagnostics and Problem SolvingDiagnostic Questions Can’t get a good fire going. What am I doing wrong?fireplace burns the wood too fast. What can I do? Disposal of Ashes Maintenance and Servicing the FireplaceChimney Inspection/Cleaning Firebox RefractoryClean Maintenance Task ListWhen cleaning glass door Chimney FireFireplace Dimensions Reference MaterialsFireplace Components Model # DescriptionChimney Components Catalog #15-1/4 387 mm 25-1/4 641 mm 14-3/4 375 mm TR442 TR442 / 444 TV Woodburning Termination CapShroud TS345 TR342 TR342 / 344 TV TR11 / 11T TR11 / 11T TV Service Parts ST42# Description of Part QtyLimited Warranty Contact Information